Welcome, Guest. Please login or register.
Did you miss your activation email?
June 19, 2019, 01:19:30 PM
Home Help Search Login Register
News:

+  DIY DataRecovery.nl Support forum
|-+  Support
| |-+  DiskPatch (Moderators: Tom, Joep)
| | |-+  Bios detects drive but windows disk manager does not
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bios detects drive but windows disk manager does not  (Read 12341 times)
zolson
member

Posts: 6


« on: December 02, 2008, 12:37:55 AM »

HD= RE2 WD5000YS 500gb SATA 2yrs old.

This problem occurred recently out of the blue, no wierd noises or vibrations coming from the drive, physically it seems to be running fine. The drive is just a secondary to the OS drive, so the system still runs fine, but there is a lot of valuable data on this secondary drive that I'd like to be able to fix/recover if possible. Everything reads fine in the bios, but nada in the OS. I'm able to get the windows disk manager to see the drive if I put it in an external enclosure via usb, but even this only shows that it is a disk and has errors, no further info. Log is posted below, I'd like to purchase the program full if there is a good possibility that it can alleviate the problem.

Code:
.../000:02/LOG> ### LOG START ###
.../000:02/LOG> DISKPATCH 3.5.100
.../000:02/LOG> (C) 2000-2008 DIY DataRecovery
.../000:02/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:02/LOG> MemFree: 70Kb
.../000:02/LOG> CommandLineParms: /sup
.../000:02/LOG> LogDate: 12-01-2008
.../000:02/CFG> FilePath="1/.\DPFILES\"
.../000:02/CFG> LogFilename="DP.LOG"
.../000:02/CFG> ReadRetries="32"
.../000:02/CFG> WriteRetries="32"
.../000:02/CFG> MaxReadErrors="32"
.../000:02/CFG> MaxWriteErrors="1"
.../000:03/CFG> LogEachReadError="1"
.../000:03/CFG> ReadDelay="0"
.../000:03/CFG> VfyFixedBadSect="1"
.../000:03/CFG> CleanAfterDOD="1"
.../000:03/CFG> DiskReset="1"
.../000:03/CFG> SectorSkip="1024"
.../000:03/CFG> AutoSaveState="1"
.../000:03/CFG> DumpFoundSectors="0"
.../000:03/CFG> FixFats="1"
.../000:03/CFG> MaxFatScan="51200"
.../000:03/CFG> MaxDataColEntries="256"
.../000:03/CFG> IgnoreF8FF="0"
.../000:03/CFG> DownSizeExt="1"
.../000:03/CFG> ScanSignature="55AA"
.../000:03/CFG> Rebuild="00"
.../000:03/13H> Ext13H installed test requested
.../000:03/13H> Disk found at 128
.../000:03/13H> Ext13H version: EDD-3.0
.../000:03/13H> Ext13H Support: Extended disk access functions
.../000:03/13H> Ext13H Support: Enhanced disk drive functions
.../000:03/13H> Drive Interface Info:
.../000:03/13H> Disk 128 X13H data : 65535/16/63 976773168/512
.../000:03/13H> Ext13H tested ok
.../000:03/FDL> DiskList requested
.../000:03/FDL> Disk found at 128
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | .976773168 | .16 | 63 | 465
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:03/IAS> AdmiSector found on disk 0 (128)
.../000:03/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:03/WAS> AdmiSectors in use : 0+
.../000:03/KEY> DEMO/1
.../000:03/PFC> PQstuff signature not detected on disk 0 (128)
.../000:03/PFC> UDMA driver not loaded
.../000:03/PFC> Disk health not checked
.../000:04/PFC> Partition State backup not found on disk 0 (128)
.../000:05/PFC> No Repair date found on disk 0 (128)
.../000:21/VEC> Start Verify EPBR Chain for disk 0 (128)
.../000:21/VEC> Listing current partitions on disk:
.../000:21/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
.../000:21/VEC> Partition Table info for sector 0 (0 0 1)
.../000:21/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
.../000:22/VEC> 55AA sig Ok
.../000:30/VEC> Verify EPBR Chain completed
.../000:34/CSD> Start CheckDisk for disk 0 (128)
.../000:34/CSD> CheckDisk complete, ReadErrors 0
.../000:34/USD> Disk 0 (128) selected
.../000:34/GSC> No geo change detected for disk 0 (128)
.../000:34/WAS> AdmiSectors in use : 0+
.../000:34/GSC> Geo for disk 0 (128) saved as 0976773168016063
128/000:34/USD> MBR for disk 0 (128)
128/000:34/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3???.|?P.P.??.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ?..PW??.????.?.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.??.???.??
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ??.It.8,t? ?.?.?
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ??<.t??..?.?.???
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.?F.s*?F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ?.u?F..?
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..?V..?!.s. ?.?
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ??>?}U?t.?~..t? 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ?.??.W???..?V
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .?.?.r#??$?????
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C?????.??B??9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.?..?.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ?N.?V.?.sQOtN2??
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.?.???V.`??U?A?
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6??U?u0??.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.?B???.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2??V.?.??a??Inva
304   6C 69 64 20 70 61 72 74 69 74 69 6F 6E 20 74 61  |  lid partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 A2 68 66 31 00 00 00 01  |  .....,Dc?hf1....
448   01 00 42 0F FF FF 3F 00 00 00 F1 5F 38 3A 00 00  |  ..B...?...?_8:..
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
128/000:34/VEC> Start Verify EPBR Chain for disk 0 (128)
128/000:34/VEC> Listing current partitions on disk:
128/000:34/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
128/000:34/VEC> Partition Table info for sector 0 (0 0 1)
128/000:34/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/000:35/VEC> 55AA sig Ok
128/000:35/VEC> Verify EPBR Chain completed
128/000:35/USD> Select disk completed
128/000:49/SCN> DiskScan requested, ScanType is 3
128/000:49/SCN> from 0 (0 0 1) to 976773167 (969020 15 63), 976773168 sectors
128/000:49/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/000:49/SCN> Next QuickScan location at 976771120 (969018 15 32)
128/000:50/SCN> Next QuickScan location at 0 (0 0 1)
128/000:50/SCN> QuickScan finished
128/000:50/SCN> Starting SmartScan (pre-vista) at 0 (0 0 1) (JMP=1008, RNG=63)
128/534:01/SCN> SmartScan finished
128/534:01/SCN> DiskScan completed
128/534:01/SCN> ReadErrors for disk 0 (128): 0
128/599:03/LOG> DataCollection items found: 10 / 3
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | .976771057 | PRI | .
002 | 128 | .976771119 | ...NTFS | ..BS | .976771119 | .976771057 | PRI | .
003 | 128 | .........0 | ....DYN | PTE1 | ........63 | .976773105 | PRI | I
004 | 128 | .........6 | ....DYN | .LDM | ........63 | 4294967233 | PRI | I
005 | 128 | ........63 | ...NTFS | ..BS | ........63 | .976771057 | PRI | I
006 | 128 | .306157885 | ..FAT16 | PTE4 | 4197707794 | .223480467 | LOG | .
007 | 128 | .379868880 | .GOBACK | PTE3 | 1525193492 | .759796292 | LOG | .
008 | 128 | .441729869 | OS/2 BM | PTE1 | ..82794135 | 2624589094 | LOG | .
009 | 128 | .441729869 | ..FAT32 | PTE2 | 1754944738 | .825258284 | LOG | .
010 | 128 | .698707341 | EZDRIVE | PTE2 | 3409683230 | 2259921106 | LOG | .
128/599:04/LOG> DataCollection items found: 10 / 3
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | .976771057 | PRI
002 | 128 | .976771119 | ...NTFS | ..BS | .976771119 | .976771057 | PRI
006 | 128 | .306157885 | ..FAT16 | PTE4 | 4197707794 | .223480467 | LOG
007 | 128 | .379868880 | .GOBACK | PTE3 | 1525193492 | .759796292 | LOG
008 | 128 | .441729869 | OS/2 BM | PTE1 | ..82794135 | 2624589094 | LOG
009 | 128 | .441729869 | ..FAT32 | PTE2 | 1754944738 | .825258284 | LOG
010 | 128 | .698707341 | EZDRIVE | PTE2 | 3409683230 | 2259921106 | LOG
128/599:04/C4L> PTE found for DYN partition at LBA 0 / DC 3
128/599:04/LOG> PartList items created: 7
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ... | ..1 | ... | ..0 | ..1 | ..1 | ..1 | 1 | ..B
002 | OS/2 BM | ..8 | ..0 | ..0 | ..0 | ..8 | ..8 | ..8 | 1 | ..-
003 | ...NTFS | ... | ..2 | ... | ..0 | ..2 | ..2 | ..2 | 1 | ..B
004 | .GOBACK | ..7 | ..0 | ..0 | ..0 | ..7 | ..7 | ..7 | 1 | ..-
005 | ..FAT32 | ..9 | ... | ... | ... | ..9 | ..9 | ..9 | 1 | ...
006 | EZDRIVE | .10 | ..0 | ..0 | ..0 | .10 | .10 | .10 | 1 | ..-
007 | ..FAT16 | ..6 | ... | ..0 | ... | ..6 | ..6 | ..6 | 1 | ...
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R_|___A
001 | ...NTFS | ........63 | .976771057 | .976771119 | PRI | ..B | ..X
002 | OS/2 BM | ..82794135 | 2624589094 | 2707383228 | LOG | ..- | ..?
003 | ...NTFS | .976771119 | .976771057 | 1953542175 | PRI | ..B | ..?
004 | .GOBACK | 1525193492 | .759796292 | 2284989783 | LOG | ..- | ..?
005 | ..FAT32 | 1754944738 | .825258284 | 2580203021 | LOG | ... | ..?
006 | EZDRIVE | 3409683230 | 2259921106 | 1374637039 | LOG | ..- | ..?
007 | ..FAT16 | 4197707794 | .223480467 | .126220964 | LOG | ... | ..?
128/599:04/SST> SaveState requested for disk 0 (128)
128/599:10/WAS> AdmiSectors in use : 0+
128/599:10/SST> SaveState completed for disk 0 (128)
128/599:10/EXE> Analysis complete
128/599:14/LOG> RunTime: 599:14
128/599:14/LOG> ### CLOSE LOG ###

Thanks,
-z
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #1 on: December 02, 2008, 08:42:16 AM »

Hello,

Quote
Everything reads fine in the bios, but nada in the OS

So, the physical disk is not appearing in disk management? Or does it appear there? If you run iRecover, does it detect the physical disk?

Quote
if I put it in an external enclosure via usb, but even this only shows that it is a disk and has errors, no further info.

No further info means, no volumes? But the disk appears in disk management?

maybe you can link to screenshots (or email them) of diskmanagement for both situations.

The disk is 'dynamic'. Possibly there's a LDM problem. the LDM is located at the end of the disk and is where volume info is tracked/stored.

DiskPatch detects 2 NTFS partitions. Is this correct, were there 2 logical volumes on that disk? If so then we could add those 2 volumes to a MBR partition table. The disk will be 'basic' after repair.

To do so, run DiskPatch and select the 2 NTFS partitions. Fire up Wimdows and see if you can access the volumes.

- If so, then I recommend you back up the data and you can then even convert the disk to dynamic again (if desired).

- If NOT, then use iRecover to extract data from the disk. We will refund DiskPatch in that case.

Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
zolson
member

Posts: 6


« Reply #2 on: December 02, 2008, 01:37:28 PM »

Thanks for the reply.

The drive should be only one partition.

If the drive is installed like a regular internal hd then absolutely nothing shows up in disk manager, it's as if the OS refuses to detect/recognize the drive all.

Here is a screen cap when I run the drive(disk1) externally via usb:


One other thing, this disk used to be a secondary drive in my XP machine, one of the problems is that I can't remember if I re-formatted the disk when I put it in my vista machine, so if it is a vista format or XP, I'm not sure. Is there a way to determine this?
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #3 on: December 02, 2008, 02:45:05 PM »

Hello,

Then it is likely the disk has I/O errors. When you start DiskPatch, you skip the disk health check (or it can't be checked).

This is tricky then. What you can do is run a read-only surface scan using DiskPatch. As soon as errors start appearing abort, quit DiskPatch and post the latest logfile.
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
zolson
member

Posts: 6


« Reply #4 on: December 03, 2008, 04:16:33 PM »

When DiskPatch does the inital drive scan for "health", the problem drive has a blue bar with a "?" mark in it vs. the green health bar.

So I had a friend of mine (computer guru) over yesterday and we were able to get the disk to show up in windows just the same as it does with the external via usb with the same results.

We checked some of the logs in Vista to see if it was coming up with anything and it turns out there are "bad blocks" on the disk primarily right at the beginning of the disk as far as we could tell.

I'll post the log of the surface scan tonight, it started coming up with errors about 100k sectors into the disk and stopped shortly there after.

It's beginning to look as if I need to pick up another drive (1tb), format it ntfs, and attempt to clone it to salvage what I can off the drive, with any luck I might get 90% or even more off the disk.

Thanks,

-z
Logged
zolson
member

Posts: 6


« Reply #5 on: December 04, 2008, 03:41:26 AM »

Here is the log file for the disk scan (read only). I did 2 RO scans.

Code:
.../000:46/LOG> ### LOG START ###
.../000:46/LOG> DISKPATCH 3.5.100
.../000:46/LOG> (C) 2000-2008 DIY DataRecovery
.../000:46/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:46/LOG> MemFree: 70Kb
.../000:46/LOG> CommandLineParms: /fil
.../000:46/LOG> LogDate: 12-02-2008
.../000:46/CFG> FilePath="1/.\DPFILES\"
.../000:46/CFG> LogFilename="DP.LOG"
.../000:46/CFG> ReadRetries="32"
.../000:46/CFG> WriteRetries="32"
.../000:46/CFG> MaxReadErrors="32"
.../000:46/CFG> MaxWriteErrors="1"
.../000:46/CFG> LogEachReadError="1"
.../000:46/CFG> ReadDelay="0"
.../000:46/CFG> VfyFixedBadSect="1"
.../000:46/CFG> CleanAfterDOD="1"
.../000:46/CFG> DiskReset="1"
.../000:46/CFG> SectorSkip="1024"
.../000:46/CFG> AutoSaveState="1"
.../000:46/CFG> DumpFoundSectors="0"
.../000:46/CFG> FixFats="1"
.../000:46/CFG> MaxFatScan="51200"
.../000:46/CFG> MaxDataColEntries="256"
.../000:46/CFG> IgnoreF8FF="0"
.../000:46/CFG> DownSizeExt="1"
.../000:46/CFG> ScanSignature="55AA"
.../000:46/CFG> Rebuild="00"
.../000:46/13H> Ext13H installed test requested
.../000:46/13H> Disk found at 128
.../000:46/13H> Ext13H version: EDD-3.0
.../000:46/13H> Ext13H Support: Extended disk access functions
.../000:46/13H> Ext13H Support: Enhanced disk drive functions
.../000:46/13H> Drive Interface Info:
.../000:46/13H> Disk 128 X13H data : 16383/16/63 293046768/512
.../000:46/13H> Disk found at 129
.../000:46/13H> Ext13H version: EDD-3.0
.../000:46/13H> Ext13H Support: Extended disk access functions
.../000:46/13H> Ext13H Support: Enhanced disk drive functions
.../000:47/13H> Drive Interface Info:
.../000:47/13H> Disk 129 X13H data : 65535/16/63 976773168/512
.../000:47/13H> Ext13H tested ok
.../000:47/FDL> DiskList requested
.../000:47/FDL> Disk found at 128
.../000:47/FDL> Disk found at 129
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | .293046768 | 255 | 63 | 139
129 | .976773168 | .16 | 63 | 465
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:47/IAS> AdmiSector init complete for disk 0 (128)
.../000:47/IAS> AdmiSector found on disk 1 (129)
.../000:47/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:48/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:48/WAS> AdmiSectors in use : 0+ 1+
.../000:59/KEY> DEMO/1
.../000:59/PFC> PQstuff signature not detected on disk 0 (128)
.../000:59/PFC> PQstuff signature not detected on disk 1 (129)
.../000:59/PFC> UDMA driver not loaded
.../001:00/PFC> Disk health 50-100
.../001:01/PFC> Partition State backup not found on disk 0 (128)
.../001:02/PFC> Partition State backup not found on disk 1 (129)
.../001:02/PFC> No Repair date found on disk 0 (128)
.../001:02/PFC> No Repair date found on disk 1 (129)
.../001:09/MNU> - Main, Select Disk
.../001:22/VEC> Start Verify EPBR Chain for disk 1 (129)
.../001:22/VEC> Listing current partitions on disk:
.../001:22/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
.../001:22/VEC> Partition Table info for sector 0 (0 0 1)
.../001:23/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
.../001:23/VEC> 55AA sig Ok
.../001:28/VEC> Verify EPBR Chain completed
.../001:31/CSD> Start CheckDisk for disk 1 (129)
.../001:31/CSD> CheckDisk complete, ReadErrors 0
.../001:31/USD> Disk 1 (129) selected
.../001:31/GSC> No geo change detected for disk 1 (129)
.../001:31/WAS> AdmiSectors in use : 0+ 1+
.../001:31/GSC> Geo for disk 1 (129) saved as 0976773168016063
129/001:31/USD> MBR for disk 1 (129)
129/001:31/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3???.|?P.P.??.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ?..PW??.????.?.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.??.???.??
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ??.It.8,t? ?.?.?
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ??<.t??..?.?.???
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.?F.s*?F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ?.u?F..?
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..?V..?!.s. ?.?
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ??>?}U?t.?~..t? 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ?.??.W???..?V
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .?.?.r#??$?????
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C?????.??B??9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.?..?.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ?N.?V.?.sQOtN2??
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.?.???V.`??U?A?
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6??U?u0??.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.?B???.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2??V.?.??a??Inva
304   6C 69 64 20 70 61 72 74 69 74 69 6F 6E 20 74 61  |  lid partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 A2 68 66 31 00 00 00 01  |  .....,Dc?hf1....
448   01 00 42 0F FF FF 3F 00 00 00 F1 5F 38 3A 00 00  |  ..B...?...?_8:..
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
129/001:31/VEC> Start Verify EPBR Chain for disk 1 (129)
129/001:31/VEC> Listing current partitions on disk:
129/001:31/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
129/001:31/VEC> Partition Table info for sector 0 (0 0 1)
129/001:31/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
129/001:31/VEC> 55AA sig Ok
129/001:31/VEC> Verify EPBR Chain completed
129/001:32/USD> Select disk completed
129/001:36/MNU> - Main, Options
129/001:47/MNU> - Main, Options
129/001:52/MNU> - Main, Utilities
129/002:04/MNU> - Support, Analyze Disk (no repair, create log)
129/002:09/MNU> - Main, Utilities
129/002:11/MNU> - Main, MBR ops
129/002:13/WDS> !- No sector write allowed, Trial mode
129/002:13/MNU> MBR BootCode Refresh complete for disk 1 (129)
129/002:27/CPA> Start Change Partition Attributes, dump follows;
129/002:27/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
129/002:32/CPA> Change Partition Attributes aborted
129/002:35/MNU> - Main, Disk Ops
129/002:39/MNU> - Main, Repairs
129/002:41/MNU> - Main, Disk Ops
129/002:43/MNU> - Disk Ops, Clone Disk
129/003:03/MNU> - Main, Repairs
129/003:05/MNU> - Repair, Rebuild Partition Tables
129/003:36/EXE> Analysis aborted
129/003:40/MNU> - Main, Disk Ops
129/003:42/MNU> - Disk Ops, Surface Scan (RO)
129/003:51/MNU> - Disk Ops, Surface Scan (RO)
129/004:02/SUR> Start RO Surface Scan, from 63 to 976773167
129/004:02/SUR> Read/Write Errors reset; Read/Write Errors until now : 0/0
129/004:10/RDS> ReadError for disk 129 at 107622 (106 12 19), C:1, T:01h
129/004:16/RDS> ReadSector success (after error) at 107622 (106 12 19), tries 3
129/004:21/RDS> ReadError for disk 129 at 107626 (106 12 23), C:1, T:01h
129/005:56/SUR> !- Surface Scan aborted at sector 182275 (180 13 17)
129/005:57/SUR> Surface Scan end, R/W Errors/Reallocated is 1/0/0
129/005:58/MNU> - Disk Ops, Surface Scan (RO)
129/006:07/MNU> - Disk Ops, Surface Scan (RW)
129/006:10/MNU> - Disk Ops, Surface Scan (RO)
129/006:23/MNU> - Disk Ops, Surface Scan (RO)
129/006:29/MNU> - Disk Ops, Surface Scan (RO)
129/006:31/MNU> - Main, Select Disk
129/006:41/CSD> Start CheckDisk for disk 1 (129)
129/006:41/CSD> CheckDisk complete, ReadErrors 0
129/006:41/USD> Disk 1 (129) selected
129/006:41/GSC> No geo change detected for disk 1 (129)
129/006:41/WAS> AdmiSectors in use : 0+ 1+
129/006:41/GSC> Geo for disk 1 (129) saved as 0976773168016063
129/006:41/USD> MBR for disk 1 (129)
129/006:41/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3???.|?P.P.??.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ?..PW??.????.?.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.??.???.??
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ??.It.8,t? ?.?.?
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ??<.t??..?.?.???
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.?F.s*?F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ?.u?F..?
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..?V..?!.s. ?.?
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ??>?}U?t.?~..t? 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ?.??.W???..?V
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .?.?.r#??$?????
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C?????.??B??9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.?..?.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ?N.?V.?.sQOtN2??
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.?.???V.`??U?A?
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6??U?u0??.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.?B???.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2??V.?.??a??Inva
304   6C 69 64 20 70 61 72 74 69 74 69 6F 6E 20 74 61  |  lid partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 A2 68 66 31 00 00 00 01  |  .....,Dc?hf1....
448   01 00 42 0F FF FF 3F 00 00 00 F1 5F 38 3A 00 00  |  ..B...?...?_8:..
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
129/006:42/VEC> Start Verify EPBR Chain for disk 1 (129)
129/006:42/VEC> Listing current partitions on disk:
129/006:42/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
129/006:42/VEC> Partition Table info for sector 0 (0 0 1)
129/006:42/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
129/006:42/VEC> 55AA sig Ok
129/006:42/VEC> Verify EPBR Chain completed
129/006:42/USD> Select disk completed
129/006:46/MNU> - Main, Disk Ops
129/006:47/MNU> - Disk Ops, Surface Scan (RO)
129/006:52/MNU> - Disk Ops, Surface Scan (RO)
129/007:12/SUR> Start RO Surface Scan, from 0 to 99999
129/007:12/SUR> Read/Write Errors reset; Read/Write Errors until now : 1/0
129/007:16/SUR> Surface Scan completed
129/007:21/SUR> Surface Scan end, R/W Errors/Reallocated is 0/0/0
129/007:23/MNU> - Disk Ops, Surface Scan (RO)
129/007:32/MNU> - Disk Ops, Surface Scan (RO)
129/007:56/SUR> Start RO Surface Scan, from 0 to 999999
129/007:56/SUR> Read/Write Errors reset; Read/Write Errors until now : 0/0
129/008:05/RDS> ReadError for disk 129 at 107623 (106 12 20), C:1, T:01h
129/008:13/RDS> ReadSector success (after error) at 107623 (106 12 20), tries 4
129/008:17/RDS> ReadError for disk 129 at 107626 (106 12 23), C:1, T:01h
129/009:55/SUR> !- Surface Scan aborted at sector 136192 (135 1 50)
129/009:57/SUR> Surface Scan end, R/W Errors/Reallocated is 1/0/0
129/010:05/MNU> - Main, Options
129/010:32/MNU> - Main, Utilities
129/010:36/MNU> - Main, Quit
129/010:36/LOG> RunTime: 010:36
129/010:36/LOG> ### CLOSE LOG ###
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #6 on: December 04, 2008, 09:25:20 AM »

Hello,

Yes, cloning seems the safest option. The read errors are a bit weird, it's hard to tell what's causing them. Can you create a disk health report and post that please?

If you will be cloning with DiskPatch then there is no need to format the destination disk.
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
zolson
member

Posts: 6


« Reply #7 on: December 05, 2008, 12:21:02 AM »

So am I correct in saying that DiskPatch automatically formats the destination drive to match the format of the drive being cloned before the cloning begins?

Also, the drives don't have to be the same size do they? The destination drive can be larger right?

A the first is the disk health (Disk: #1) and the second is the result of a complete RO surface scan (5 errors detected). Let me know what you think:

Code:
Detected Controllers

  Disk Controller 1
    Device Vendor . . . . . . . . . . . . . : 8086
    Device ID . . . . . . . . . . . . . . . : 2920
    Device  . . . . . . . . . . . . . . . . : Intel
    Device Location . . . . . . . . . . . . : Bus 0, Device 31, Function 2
    Device Ports  . . . . . . . . . . . . . : F900-F907, F800-F803, F700-F707, F600-F603, F500-F50F, F400-F40F

  Disk Controller 2
    Device Vendor . . . . . . . . . . . . . : 8086
    Device ID . . . . . . . . . . . . . . . : 2926
    Device  . . . . . . . . . . . . . . . . : Intel
    Device Location . . . . . . . . . . . . : Bus 0, Device 31, Function 5
    Device Ports  . . . . . . . . . . . . . : F200-F207, F100-F103, F000-F007, EF00-EF03, EE00-EE0F, ED00-ED0F

  Disk Controller 3
    Device Vendor . . . . . . . . . . . . . : 197B
    Device ID . . . . . . . . . . . . . . . : 2363
    Device Location . . . . . . . . . . . . : Bus 3, Device 0, Function 0
    Device Ports  . . . . . . . . . . . . . : CF00-CF07, CE00-CE03, CD00-CD07, CC00-CC03, CB00-CB0F

Physical Disk Information - Disk: #0

  Hard Disk Summary
    Hard Disk Number  . . . . . . . . . . . : 0
    Interface . . . . . . . . . . . . . . . : S-ATA
    Connection  . . . . . . . . . . . . . . : 1
    Hard Disk Model ID  . . . . . . . . . . : WDC WD1500ADFD-00NLR5
    Hard Disk Revision  . . . . . . . . . . : 21.07QR5
    Hard Disk Serial Number . . . . . . . . : WD-WMAP41820764
    Hard Disk Total Size  . . . . . . . . . : 167683 MB
    Current Temperature:  . . . . . . . . . : 27 ?C (81 ?F)
    Power on time . . . . . . . . . . . . . : 311 days, 1 hours
    Health: . . . . . . . . . . . . . . . . : 100 %
    Performance:  . . . . . . . . . . . . . : 100 %

  ATA Information
    Hard Disk Cylinders . . . . . . . . . . : 28577
    Hard Disk Heads . . . . . . . . . . . . : 16
    Hard Disk Sectors . . . . . . . . . . . : 63
    Total Sectors . . . . . . . . . . . . . : 293046768
    ATA Revision  . . . . . . . . . . . . . : 7
    Bytes Per Sector  . . . . . . . . . . . : 600
    Buffer Size . . . . . . . . . . . . . . : 16384 KB
    Multiple Sectors  . . . . . . . . . . . : 16
    Error Correction Bytes  . . . . . . . . : 48
    Unformatted Capacity  . . . . . . . . . : 167683 MB
    Maximum PIO Mode  . . . . . . . . . . . : 4
    Maximum Multiword DMA Mode  . . . . . . : 2
    Maximum UDMA Mode . . . . . . . . . . . : 150 MB/s (6)
    Active UDMA Mode  . . . . . . . . . . . : 150 MB/s (5)
    Minimum multiword DMA transfer time . . : 120 ns
    Recommended multiword DMA transfer time : 120 ns
    Minimum PIO transfer time without IORDY : 120 ns
    Minimum PIO transfer time with IORDY  . : 120 ns
    ATA Control Byte  . . . . . . . . . . . : Valid

  Acoustic Management Configuration
    Acoustic Management . . . . . . . . . . : Supported
    Acoustic Management . . . . . . . . . . : Enabled
    Current Acoustic Level  . . . . . . . . : Max performance and volume (FEh)
    Recommended Acoustic Level  . . . . . . : Min performance and volume (80h)

  EIDE Properties
    Read Ahead Buffer . . . . . . . . . . . : Supported
    DMA . . . . . . . . . . . . . . . . . . : Supported
    Ultra DMA . . . . . . . . . . . . . . . : Supported
    S.M.A.R.T.  . . . . . . . . . . . . . . : Supported
    Power Management  . . . . . . . . . . . : Supported
    Write Cache . . . . . . . . . . . . . . : Supported
    Host Protected Area . . . . . . . . . . : Supported
    Advanced Power Management . . . . . . . : Not Supported
    Power Up In Standby . . . . . . . . . . : Supported
    48-bit LBA Addressing . . . . . . . . . : Supported
    Device Configuration Overlay  . . . . . : Supported
    IORDY Support . . . . . . . . . . . . . : Supported
    Read/Write DMA Queue  . . . . . . . . . : Not Supported
    NOP Command . . . . . . . . . . . . . . : Supported
    Trusted Computing . . . . . . . . . . . : Not Supported
    64-bit World Wide ID  . . . . . . . . . : Not Supported
    Streaming . . . . . . . . . . . . . . . : Not Supported
    Media Card Pass Through . . . . . . . . : Not Supported
    General Purpose Logging . . . . . . . . : Supported
    Error Logging . . . . . . . . . . . . . : Supported
    CFA Feature Set . . . . . . . . . . . . : Not Supported
    Long Physical Sectors (1) . . . . . . . : Not Supported
    Long Logical Sectors  . . . . . . . . . : Not Supported
    Write-Read-Verify . . . . . . . . . . . : Not Supported
    NV Cache Feature  . . . . . . . . . . . : Not Supported
    NV Cache Power Mode . . . . . . . . . . : Not Supported

  S.M.A.R.T. Details
    Off-line data collection  . . . . . . . : Succesfully completed
    Self test execution status  . . . . . . : Succesfully completed
    Total time to complete off-line data ...: 4783 seconds
    Execute off-line immediate  . . . . . . : Supported
    Abort/restart off-line by host  . . . . : Not Supported
    Off-line read scanning  . . . . . . . . : Supported
    Short Self-test . . . . . . . . . . . . : Supported
    Extended Self-test  . . . . . . . . . . : Supported
    Conveyance self-test  . . . . . . . . . : Supported
    Selective self-test . . . . . . . . . . : Supported
    Save data before/after power saving mode: Supported
    Enable/Disable attribute autosave . . . : Supported
    Error logging capability  . . . . . . . : Supported
    Short self-test estimated time  . . . . : 2 minutes
    Extended self-test estimated time . . . : 72 minutes
    Conveyance self-test estimated time . . : 5 minutes

  Security Mode
    Security Mode . . . . . . . . . . . . . : Supported
    Security Erase  . . . . . . . . . . . . : Not Supported
    Security Erase Time . . . . . . . . . . : Not Supported
    Security Enhanced Erase Feature . . . . : Not Supported
    Security Enhanced Erase Time  . . . . . : Not Supported
    Security Enabled  . . . . . . . . . . . : No
    Security Locked . . . . . . . . . . . . : No
    Security Frozen . . . . . . . . . . . . : No
    Security Counter Expired  . . . . . . . : No
    Security Level  . . . . . . . . . . . . : High

  Serial ATA Features
    S-ATA Compliance  . . . . . . . . . . . : Yes
    S-ATA I Signaling Speed (1.5 Gps) . . . : Supported
    S-ATA II Signaling Speed (3 Gps)  . . . : Not Supported
    Receipt Of Power Management Requests ...: Not Supported
    PHY Event Counters  . . . . . . . . . . : Supported
    Non-Zero Buffer Offsets In DMA Setup FIS: Not Supported
    DMA Setup Auto-Activate Optimization  . : Supported, Disabled
    Device Initiating Interface Power Man...: Not Supported
    In-Order Data Delivery  . . . . . . . . : Not Supported
    Asynchronous Notification . . . . . . . : Not Supported
    Software Settings Preservation  . . . . : Supported, Enabled
    Native Command Queuing  . . . . . . . . : Supported
    Queue Length  . . . . . . . . . . . . . : 32

  S.M.A.R.T.
    1  : Raw Read Error Rate            Threshold=51  Value=200 Worst=200 Data=000000000000 Status=OK                        Flags=Error-rate, Statistical, Critical
    3  : Spin Up Time                   Threshold=21  Value=170 Worst=165 Data=0000000011AD Status=OK                        Flags=Performance, Statistical, Critical
    4  : Start/Stop Count               Threshold=40  Value=99  Worst=99  Data=0000000006BB Status=OK                        Flags=Self Preserving, Event Count, Statistical
    5  : Reallocated Sectors Count      Threshold=140 Value=200 Worst=200 Data=000000000000 Status=OK                        Flags=Self Preserving, Event Count, Statistical, Critical
    7  : Seek Error Rate                Threshold=51  Value=200 Worst=200 Data=000000000000 Status=OK                        Flags=Error-rate, Statistical
    9  : Power-On Time Count            Threshold=0   Value=90  Worst=90  Data=000000001D29 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    10 : Spin Retry Count               Threshold=51  Value=100 Worst=100 Data=000000000000 Status=OK                        Flags=Event Count, Statistical
    11 : Drive Calibration Retry Count  Threshold=51  Value=100 Worst=253 Data=000000000000 Status=OK                        Flags=Event Count, Statistical
    12 : Drive Power Cycle Count        Threshold=0   Value=100 Worst=100 Data=000000000031 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    194: HDD Temperature                Threshold=0   Value=120 Worst=105 Data=00000000001B Status=OK (Always passing)       Flags=Self Preserving, Statistical
    196: Reallocation Event Count       Threshold=0   Value=200 Worst=200 Data=000000000000 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    197: Current Pending Sector Count   Threshold=0   Value=200 Worst=200 Data=000000000000 Status=OK (Always passing)       Flags=Event Count, Statistical
    198: Off-Line Uncorrectable Sect... Threshold=0   Value=200 Worst=200 Data=000000000000 Status=OK (Always passing)       Flags=Event Count, Statistical
    199: Ultra ATA CRC Error Count      Threshold=0   Value=200 Worst=253 Data=000000000000 Status=OK (Always passing)       Flags=Error-rate, Statistical
    200: Write Error Rate               Threshold=51  Value=200 Worst=200 Data=000000000000 Status=OK                        Flags=Error-rate

Physical Disk Information - Disk: #1

  Hard Disk Summary
    Hard Disk Number  . . . . . . . . . . . : 1
    Interface . . . . . . . . . . . . . . . : S-ATA
    Connection  . . . . . . . . . . . . . . : 1
    Hard Disk Model ID  . . . . . . . . . . : WDC WD5000YS-01MPB0
    Hard Disk Revision  . . . . . . . . . . : 07.02E07
    Hard Disk Serial Number . . . . . . . . : WD-WCANU1201465
    Hard Disk Total Size  . . . . . . . . . : 476940 MB
    Current Temperature:  . . . . . . . . . : ?
    Power on time . . . . . . . . . . . . . : ?
    Health: . . . . . . . . . . . . . . . . : ?
    Performance:  . . . . . . . . . . . . . : ?

  ATA Information
    Hard Disk Cylinders . . . . . . . . . . : 16383
    Hard Disk Heads . . . . . . . . . . . . : 16
    Hard Disk Sectors . . . . . . . . . . . : 63
    Total Sectors . . . . . . . . . . . . . : 976773168
    ATA Revision  . . . . . . . . . . . . . : 7
    Bytes Per Sector  . . . . . . . . . . . : 512
    Buffer Size . . . . . . . . . . . . . . : 16384 KB
    Multiple Sectors  . . . . . . . . . . . : 16
    Error Correction Bytes  . . . . . . . . : 50
    Unformatted Capacity  . . . . . . . . . : 476940 MB
    Maximum PIO Mode  . . . . . . . . . . . : 4
    Maximum Multiword DMA Mode  . . . . . . : 2
    Maximum UDMA Mode . . . . . . . . . . . : 150 MB/s (6)
    Active UDMA Mode  . . . . . . . . . . . : 150 MB/s (5)
    Minimum multiword DMA transfer time . . : 120 ns
    Recommended multiword DMA transfer time : 120 ns
    Minimum PIO transfer time without IORDY : 120 ns
    Minimum PIO transfer time with IORDY  . : 120 ns
    ATA Control Byte  . . . . . . . . . . . : Valid

  Acoustic Management Configuration
    Acoustic Management . . . . . . . . . . : Supported
    Acoustic Management . . . . . . . . . . : Disabled
    Current Acoustic Level  . . . . . . . . : Max performance and volume (FEh)
    Recommended Acoustic Level  . . . . . . : Min performance and volume (80h)

  EIDE Properties
    Read Ahead Buffer . . . . . . . . . . . : Not Supported
    DMA . . . . . . . . . . . . . . . . . . : Supported
    Ultra DMA . . . . . . . . . . . . . . . : Supported
    S.M.A.R.T.  . . . . . . . . . . . . . . : Supported
    Power Management  . . . . . . . . . . . : Supported
    Write Cache . . . . . . . . . . . . . . : Supported
    Host Protected Area . . . . . . . . . . : Supported
    Advanced Power Management . . . . . . . : Not Supported
    Power Up In Standby . . . . . . . . . . : Supported
    48-bit LBA Addressing . . . . . . . . . : Supported
    Device Configuration Overlay  . . . . . : Supported
    IORDY Support . . . . . . . . . . . . . : Supported
    Read/Write DMA Queue  . . . . . . . . . : Not Supported
    NOP Command . . . . . . . . . . . . . . : Supported
    Trusted Computing . . . . . . . . . . . : Not Supported
    64-bit World Wide ID  . . . . . . . . . : Supported
    Streaming . . . . . . . . . . . . . . . : Not Supported
    Media Card Pass Through . . . . . . . . : Not Supported
    General Purpose Logging . . . . . . . . : Supported
    Error Logging . . . . . . . . . . . . . : Supported
    CFA Feature Set . . . . . . . . . . . . : Not Supported
    Long Physical Sectors (1) . . . . . . . : Not Supported
    Long Logical Sectors  . . . . . . . . . : Not Supported
    Write-Read-Verify . . . . . . . . . . . : Not Supported
    NV Cache Feature  . . . . . . . . . . . : Not Supported
    NV Cache Power Mode . . . . . . . . . . : Not Supported

  S.M.A.R.T. Details
    Off-line data collection  . . . . . . . : Never started
    Self test execution status  . . . . . . : Succesfully completed
    Total time to complete off-line data ...: 0 seconds
    Execute off-line immediate  . . . . . . : Not Supported
    Abort/restart off-line by host  . . . . : Not Supported
    Off-line read scanning  . . . . . . . . : Not Supported
    Short Self-test . . . . . . . . . . . . : Not Supported
    Extended Self-test  . . . . . . . . . . : Not Supported
    Conveyance self-test  . . . . . . . . . : Not Supported
    Selective self-test . . . . . . . . . . : Not Supported
    Save data before/after power saving mode: Not Supported
    Enable/Disable attribute autosave . . . : Not Supported
    Error logging capability  . . . . . . . : Not Supported

  Security Mode
    Security Mode . . . . . . . . . . . . . : Supported
    Security Erase  . . . . . . . . . . . . : Supported
    Security Erase Time . . . . . . . . . . : 73 minutes
    Security Enhanced Erase Feature . . . . : Not Supported
    Security Enhanced Erase Time  . . . . . : Not Supported
    Security Enabled  . . . . . . . . . . . : No
    Security Locked . . . . . . . . . . . . : No
    Security Frozen . . . . . . . . . . . . : No
    Security Counter Expired  . . . . . . . : No
    Security Level  . . . . . . . . . . . . : High

  Serial ATA Features
    S-ATA Compliance  . . . . . . . . . . . : Yes
    S-ATA I Signaling Speed (1.5 Gps) . . . : Supported
    S-ATA II Signaling Speed (3 Gps)  . . . : Not Supported
    Receipt Of Power Management Requests ...: Supported
    PHY Event Counters  . . . . . . . . . . : Supported
    Non-Zero Buffer Offsets In DMA Setup FIS: Not Supported
    DMA Setup Auto-Activate Optimization  . : Supported, Disabled
    Device Initiating Interface Power Man...: Not Supported
    In-Order Data Delivery  . . . . . . . . : Not Supported
    Asynchronous Notification . . . . . . . : Not Supported
    Software Settings Preservation  . . . . : Supported, Enabled
    Native Command Queuing  . . . . . . . . : Supported
    Queue Length  . . . . . . . . . . . . . : 32

  S.M.A.R.T.


Code:
.../000:04/LOG> ### LOG START ###
.../000:04/LOG> DISKPATCH 3.5.100
.../000:04/LOG> (C) 2000-2008 DIY DataRecovery
.../000:04/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:04/LOG> MemFree: 70Kb
.../000:04/LOG> CommandLineParms:
.../000:04/LOG> LogDate: 12-03-2008
.../000:04/CFG> FilePath="1/.\DPFILES\"
.../000:04/CFG> LogFilename="DP.LOG"
.../000:04/CFG> ReadRetries="32"
.../000:04/CFG> WriteRetries="32"
.../000:04/CFG> MaxReadErrors="32"
.../000:04/CFG> MaxWriteErrors="1"
.../000:05/CFG> LogEachReadError="1"
.../000:05/CFG> ReadDelay="0"
.../000:05/CFG> VfyFixedBadSect="1"
.../000:05/CFG> CleanAfterDOD="1"
.../000:05/CFG> DiskReset="1"
.../000:05/CFG> SectorSkip="1024"
.../000:05/CFG> AutoSaveState="1"
.../000:05/CFG> DumpFoundSectors="0"
.../000:05/CFG> FixFats="1"
.../000:05/CFG> MaxFatScan="51200"
.../000:05/CFG> MaxDataColEntries="256"
.../000:05/CFG> IgnoreF8FF="0"
.../000:05/CFG> DownSizeExt="1"
.../000:05/CFG> ScanSignature="55AA"
.../000:05/CFG> Rebuild="00"
.../000:05/13H> Ext13H installed test requested
.../000:05/13H> Disk found at 128
.../000:05/13H> Ext13H version: EDD-3.0
.../000:05/13H> Ext13H Support: Extended disk access functions
.../000:05/13H> Ext13H Support: Enhanced disk drive functions
.../000:05/13H> Drive Interface Info:
.../000:05/13H> Disk 128 X13H data : 16383/16/63 293046768/512
.../000:05/13H> Disk found at 129
.../000:05/13H> Ext13H version: EDD-3.0
.../000:05/13H> Ext13H Support: Extended disk access functions
.../000:05/13H> Ext13H Support: Enhanced disk drive functions
.../000:05/13H> Drive Interface Info:
.../000:05/13H> Disk 129 X13H data : 65535/16/63 976773168/512
.../000:05/13H> Ext13H tested ok
.../000:05/FDL> DiskList requested
.../000:05/FDL> Disk found at 128
.../000:05/FDL> Disk found at 129
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | .293046768 | 255 | 63 | 139
129 | .976773168 | .16 | 63 | 465
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:05/IAS> AdmiSector found on disk 0 (128)
.../000:05/IAS> AdmiSector found on disk 1 (129)
.../000:05/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:06/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:06/WAS> AdmiSectors in use : 0+ 1+
.../000:12/KEY> DEMO/1
.../000:12/PFC> PQstuff signature not detected on disk 0 (128)
.../000:12/PFC> PQstuff signature not detected on disk 1 (129)
.../000:12/PFC> UDMA driver not loaded
.../000:13/PFC> Disk health 50-100
.../000:14/PFC> Partition State backup not found on disk 0 (128)
.../000:14/PFC> Partition State backup not found on disk 1 (129)
.../000:14/PFC> No Repair date found on disk 0 (128)
.../000:14/PFC> No Repair date found on disk 1 (129)
.../000:43/MNU> - Main, Select Disk
.../000:51/CSD> Start CheckDisk for disk 1 (129)
.../000:51/CSD> CheckDisk complete, ReadErrors 0
.../000:51/USD> Disk 1 (129) selected
.../000:51/GSC> No geo change detected for disk 1 (129)
.../000:51/WAS> AdmiSectors in use : 0+ 1+
.../000:51/GSC> Geo for disk 1 (129) saved as 0976773168016063
129/000:52/USD> MBR for disk 1 (129)
129/000:52/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3???.|?P.P.??.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ?..PW??.????.?.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.??.???.??
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ??.It.8,t? ?.?.?
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ??<.t??..?.?.???
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.?F.s*?F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ?.u?F..?
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..?V..?!.s. ?.?
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ??>?}U?t.?~..t? 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ?.??.W???..?V
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .?.?.r#??$?????
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C?????.??B??9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.?..?.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ?N.?V.?.sQOtN2??
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.?.???V.`??U?A?
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6??U?u0??.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.?B???.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2??V.?.??a??Inva
304   6C 69 64 20 70 61 72 74 69 74 69 6F 6E 20 74 61  |  lid partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 A2 68 66 31 00 00 00 01  |  .....,Dc?hf1....
448   01 00 42 0F FF FF 3F 00 00 00 F1 5F 38 3A 00 00  |  ..B...?...?_8:..
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
129/000:52/VEC> Start Verify EPBR Chain for disk 1 (129)
129/000:52/VEC> Listing current partitions on disk:
129/000:52/VEC>      DYN (P)      SATA WD          63   976773105     (466 Gb)
129/000:52/VEC> Partition Table info for sector 0 (0 0 1)
129/000:52/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..42 | ....0...1...1 | .1023..15..63 | ........63 | .976773105
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
129/000:52/VEC> 55AA sig Ok
129/000:52/VEC> Verify EPBR Chain completed
129/000:52/USD> Select disk completed
129/000:57/MNU> - Main, Utilities
129/000:58/MNU> - Tools, DiskEditor
129/001:03/UND> Undo skipped
129/001:05/LOG> Undo settings: GL(+) DE(+) FAT(+)
129/001:05/DED> Start DiskEditor, ScanReady 0
129/001:06/DED> Exit DiskEditor at 0 (0 0 1)
129/001:14/MNU> - Tools, Undo
129/001:14/UND> Undo requested for disk 1 (129)
129/001:17/UND> No Undo archives found
129/001:21/MNU> - Main, Options
129/001:41/MNU> - Main, Disk Ops
129/001:45/MNU> - Main, MBR ops
129/001:50/MNU> - Main, Repairs
129/001:54/MNU> - Main, Disk Ops
129/002:28/MNU> - Disk Ops, Surface Scan (RO)
129/003:32/SUR> Start RO Surface Scan, from 63 to 976773167
129/003:32/SUR> Read/Write Errors reset; Read/Write Errors until now : 0/0
129/003:43/RDS> ReadError for disk 129 at 107626 (106 12 23), C:1, T:01h
129/313:35/RDS> ReadError for disk 129 at 488387007 (484510 14 46), C:2, T:01h
129/315:06/RDS> ReadError for disk 129 at 488387008 (484510 14 47), C:3, T:01h
129/626:19/RDS> ReadError for disk 129 at 976772618 (969020 7 18), C:4, T:01h
129/627:49/RDS> ReadError for disk 129 at 976772619 (969020 7 19), C:5, T:01h
129/629:16/SUR> Surface Scan completed
129/999:93/SUR> Surface Scan end, R/W Errors/Reallocated is 5/0/0
129/999:19/MNU> - Main, Options
129/999:27/MNU> - Main, Utilities
129/999:48/MNU> - Main, Quit
129/999:48/LOG> RunTime: 999:48
129/999:48/LOG> ### CLOSE LOG ###

Thank you,

-z
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #8 on: December 05, 2008, 08:32:42 AM »

Hello,

DiskPatch copies each sector of the disk 1 : 1, this includes all file sstem structres. Whatever format you put on the destination disk will be overwrtten. Yes, it's ok if the destination disk is larger.

We do not seem able to get any disk health info for the disk, and for that alone I'd rather clone it then trying to fix bad sectors in place. if I were you I'd clone it ASAP.
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
zolson
member

Posts: 6


« Reply #9 on: December 05, 2008, 01:48:34 PM »

Joe,

Awesome! Thank you very much for all your help, purchasing software and new hd online today, I'll post results when I get all of it done.

Off the top of your head, what would even cause something like this to happen out of the blue to a 2yr old normally working drive? Is this just some like freak occurrence or something?

Thanks again,
-z
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #10 on: December 05, 2008, 02:04:42 PM »

Hello,

ANY hard disk can fail without warning, new or old, does not matter and any hard disk WILL fail at some point. Statistically, a 2 year old disk that has never 'acted up' is actually quite reliable: Highest chance of failure is with very young or very old harddisks. This is sometimes referred to as the bath tub curve. A 2 year old disk is likely to be free of factory defects (it would have failed before) and will probably die as an old disk (wear and tear/old age).
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!