Welcome, Guest. Please login or register.
Did you miss your activation email?
June 19, 2019, 07:08:45 PM
Home Help Search Login Register
News:

+  DIY DataRecovery.nl Support forum
|-+  Support
| |-+  DiskPatch (Moderators: Tom, Joep)
| | |-+  help please
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: help please  (Read 10946 times)
lasernat
member

Posts: 12


« on: June 03, 2008, 09:45:45 PM »

I have a system that gets to searching for boot record from ide-0... OK

then on the next line it just hangs forever

i am using dp 2
can you help me with this?
thank you

here is a log file

.../000:10/LOG> ### LOG START ###
.../000:10/LOG> DISKPATCH 2.1.100
.../000:10/LOG> (C) 2000-2005, DIY DataRecovery
.../000:10/LOG> Contact info: http://HTTP://www.DIYDataRecovery.nl
.../000:10/LOG> DPRunType: 2
.../000:10/LOG> DPUsrName: DECKERT
.../000:10/LOG> MemFree: 110Kb
.../000:10/LOG> LogDate: 06-03-2008
.../000:10/CFG> Dump Options requested
.../000:10/CFG> FilePath="1/.\DP_FILES\"
.../000:10/CFG> LogFilename="DP.LOG"
.../000:10/CFG> ReadRetries="32"
.../000:10/CFG> MaxReadErrors="0"
.../000:10/CFG> ReadDelay="1"
.../000:11/CFG> AutoSaveState="1"
.../000:11/CFG> DumpFoundSectors="0"
.../000:11/CFG> LogLevel="2"
.../000:11/CFG> DebugLevel="0"
.../000:11/CFG> MaxFatScan="51200"
.../000:11/CFG> MaxDataColEntries="512"
.../000:11/CFG> ScanType="0"
.../000:11/CFG> IgnoreF8FF="0"
.../000:11/CFG> ScanSignature="55AA"
.../000:11/13H> Ext13H installed test requested
.../000:11/13H> Disk found at 128
.../000:11/13H> Ext13H version: 2.1 / EDD-1.1
.../000:11/13H> Ext13H Support: Extended disk access functions
.../000:11/13H> Ext13H Support: Enhanced disk drive functions
.../000:11/13H> Disk 128 X13H data : 0/0/0 78165360/512
.../000:11/13H> Ext13H tested ok
.../000:11/FDL> DiskList requested
.../000:11/FDL> Disk found at 128
.../000:11/LOG> Dump DiskList requested
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | ..78165360 | 255 | 63 | .37
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
 
.../000:11/IAS> Admi Sector init complete for disk 0 (128)
.../000:11/EXE> First Time Run, FingerPrint check requested
.../000:46/EXE> FingerPrint entered okay, saved to disk
.../000:49/PFC> PQstuff signature not detected on disk 0 (128)
.../000:49/PFC> Partition State Backup not found on disk 0 (128)
.../000:51/MNU> - Main, Select Disk
.../000:55/USD> Disk 0 (128) selected
.../000:55/USD> Read/WriteErrors reset to 0
.../000:55/USD> DataCollection / PartList cleared
.../000:55/GSC> First DP Run, Geo Info for disk 0 (128) not yet saved
.../000:56/GSC> Geo for Disk 0 (128) saved as 0078165360255063
128/000:56/LOG> Dump MBR requested
### MBR FOR DISK 128
000   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
016   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
032   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
048   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
064   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
096   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
112   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
128   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
144   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
176   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
192   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
208   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
224   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
240   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
256   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
272   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
288   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
304   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
320   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
336   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
352   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
368   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 00 00 00 0B 07 0B 07 00 00 00 00  |  ................
448   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
### Interpreted Partition Table Information
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
 
128/001:05/MNU> - Main, Options
128/001:12/CFG> Dump Options requested
128/001:12/CFG> FilePath="1/.\DP_FILES\"
128/001:13/CFG> LogFilename="DP.LOG"
128/001:13/CFG> ReadRetries="32"
128/001:13/CFG> MaxReadErrors="0"
128/001:13/CFG> ReadDelay="1"
128/001:13/CFG> AutoSaveState="1"
128/001:13/CFG> DumpFoundSectors="0"
128/001:13/CFG> LogLevel="2"
128/001:13/CFG> DebugLevel="0"
128/001:13/CFG> MaxFatScan="51200"
128/001:13/CFG> MaxDataColEntries="512"
128/001:13/CFG> ScanType="0"
128/001:13/CFG> IgnoreF8FF="0"
128/001:13/CFG> ScanSignature="55AA"
128/001:15/MNU> - Main, Analyze Disk / StateFile
128/001:21/SCN> DiskScan requested, ScanType is 0
128/001:21/SCN> DiskScan 0 (0 0 1) / 78165359 (4865 144 63) / 78165360
128/001:21/SCN> First bunnyhop BS at 63 (0 1 1)
128/001:21/SCN> Next bunnyhop BS at 78140160 (4864 0 1)
128/007:25/SCN> Next bunnyhop BS at 78140160 (4864 0 1)
128/007:25/SCN> DiskScan completed
128/007:25/SCN> ReadErrors for disk 0 (128): 0
128/007:25/SST> SaveState requested for disk 0 (128)
128/007:30/SST> SaveState finished for disk 0 (128)
128/007:30/CDC> CleanDatacollection requested
128/007:30/CDC> DataCollection Items found: 4
128/007:30/CDC> DataCollection Items flagged: 2
128/007:30/CDC> CleanDatacollection finished
128/007:30/LOG> Dump DataCollection requested
128/007:30/LOG> DataCollection Items found: 4 / 2
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | I
003 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
004 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | I
 
128/007:30/LOG> Dump DataCollection requested
128/007:30/LOG> DataCollection Items found: 4 / 2
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
003 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
 
128/007:30/MPL> MakePartList requested
128/007:30/MPL> MakePartList Items created: 1
128/007:30/MPL> MakePartList finished
128/007:30/LOG> Dump PartList requested
128/007:30/LOG> PartList Items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ... | ..1 | ..3 | --- | ..1 | ..1 | ..1 | 2 | .6+
 
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | .6+
 
128/009:16/MRL> User Select Partition 1 for Repair
128/009:59/MRL> User Abort MakeRSQPartList
128/009:59/EXE> Repair discontinued
128/010:03/MNU> - Main, Tools
128/010:26/MNU> - Main, MBR ops
128/010:37/MNU> - Main, Disk Ops
128/010:46/MNU> - Main, Options
128/010:55/CFG> Dump Options requested
128/010:55/CFG> FilePath="1/.\DP_FILES\"
128/010:55/CFG> LogFilename="DP.LOG"
128/010:55/CFG> ReadRetries="32"
128/010:55/CFG> MaxReadErrors="0"
128/010:56/CFG> ReadDelay="1"
128/010:56/CFG> AutoSaveState="1"
128/010:56/CFG> DumpFoundSectors="0"
128/010:56/CFG> LogLevel="2"
128/010:56/CFG> DebugLevel="0"
128/010:56/CFG> MaxFatScan="51200"
128/010:56/CFG> MaxDataColEntries="512"
128/010:56/CFG> ScanType="0"
128/010:56/CFG> IgnoreF8FF="0"
128/010:56/CFG> ScanSignature="55AA"
128/011:03/MNU> - Support, Analyze Disk / StateFile (no repair, create log)
128/011:08/CDC> CleanDatacollection requested
128/011:08/CDC> DataCollection Items found: 4
128/011:10/CDC> DataCollection Items flagged: 2
128/011:10/CDC> CleanDatacollection finished
128/011:10/LOG> Dump DataCollection requested
128/011:10/LOG> DataCollection Items found: 4 / 2
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | I
003 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
004 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | I
 
128/011:10/LOG> Dump DataCollection requested
128/011:10/LOG> DataCollection Items found: 4 / 2
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
003 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
 
128/011:10/MPL> MakePartList requested
128/011:10/MPL> MakePartList Items created: 1
128/011:10/MPL> MakePartList finished
128/011:10/LOG> Dump PartList requested
128/011:10/LOG> PartList Items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ... | ..1 | ..3 | --- | ..1 | ..1 | ..1 | 2 | .6+
 
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | .6+
 
128/011:10/VEC> Start Verify EPBR Chain for disk 0 (128)
128/011:10/VEC> MBR: 55AA found, Valid Type F/5 not found
128/011:10/VEC> Partition Table info for sector 0 (0 0 1)
128/011:10/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
 
128/011:10/VEC> Verify EPBR Chain finished
128/011:10/EXE> Analysis Complete
128/011:19/MNU> - Main, Quit
128/011:19/LOG> RunTime: 011:19
128/011:19/LOG> ### CLOSE LOG ###
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #1 on: June 04, 2008, 08:44:13 AM »

Hello,

It appears your only problem is your MBR being practically zeroed. Boot code and the partition tables have disappeared. An NTFS partition occupying the entire disk is detected during the disk scan.

So:
 repair partition table
 write MBR boot code
 set and active partition

and I think you'll be fine. I will not be describing all these steps in detail because they're already described step by step in the different tutorials. If I am not mistaking you can use your license key for DiskPatch 3 as well and I recommend using DiskPatch 3.

The step-by-step guides are here: http://www.diydatarecovery.nl/dp_manual/guides_main.htm, but don't hesitate to ask if you have more questions.
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
lasernat
member

Posts: 12


« Reply #2 on: June 04, 2008, 03:05:09 PM »

Hi Joep, I went through what you said (seemed pretty straight forward, also upgraded to version 3), evrything appeared to go ok but the system still hangs at the same spot, do you have another suggestion? Thank you. New log file below:

Code:
.../000:03/LOG> ### LOG START ###
.../000:03/LOG> DISKPATCH 3.4.100
.../000:03/LOG> (C) 2000-2008 DIY DataRecovery
.../000:03/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:03/LOG> MemFree: 76Kb
.../000:03/LOG> CommandLineParms:
.../000:03/LOG> LogDate: 06-04-2008
.../000:03/CFG> FilePath="1/.\DPFILES\"
.../000:03/CFG> LogFilename="DP.LOG"
.../000:03/CFG> ReadRetries="32"
.../000:03/CFG> WriteRetries="32"
.../000:03/CFG> MaxReadErrors="32"
.../000:03/CFG> MaxWriteErrors="1"
.../000:03/CFG> ReadDelay="0"
.../000:03/CFG> VfyFixedBadSect="1"
.../000:03/CFG> CleanAfterDOD="1"
.../000:03/CFG> DiskReset="1"
.../000:03/CFG> SectorSkip="1024"
.../000:03/CFG> AutoSaveState="1"
.../000:03/CFG> DumpFoundSectors="0"
.../000:03/CFG> FixFats="1"
.../000:03/CFG> MaxFatScan="51200"
.../000:03/CFG> MaxDataColEntries="256"
.../000:03/CFG> IgnoreF8FF="0"
.../000:03/CFG> DownSizeExt="1"
.../000:03/CFG> ScanSignature="55AA"
.../000:03/CFG> Rebuild="00"
.../000:03/13H> Ext13H installed test requested
.../000:03/13H> Disk found at 128
.../000:03/13H> Ext13H version: 2.1 / EDD-1.1
.../000:03/13H> Ext13H Support: Extended disk access functions
.../000:03/13H> Ext13H Support: Enhanced disk drive functions
.../000:03/13H> Drive Interface Info :
.../000:03/13H> Disk 128 X13H data : 0/0/0 78165360/512
.../000:03/13H> Ext13H tested ok
.../000:03/FDL> DiskList requested
.../000:03/FDL> Disk found at 128
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | ..78165360 | 255 | 63 | .37
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:03/IAS> AdmiSector found on disk 0 (128)
.../000:03/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:03/WAS> AdmiSectors in use : 0+
.../000:04/KEY> DECKERT/4
.../000:04/PFC> UDMA driver active
.../000:04/PFC> PQstuff signature not detected on disk 0 (128)
.../000:05/PFC> Partition State backup not found on disk 0 (128)
.../000:06/PFC> Last Repair (R) for disk 0 (128) performed on 06042008/091837
.../000:13/MNU> - Main, Select Disk
.../000:21/CSD> Start CheckDisk for disk 0 (128)
.../000:21/CSD> CheckDisk complete, ReadErrors 0
.../000:21/USD> Disk 0 (128) selected
.../000:21/GSC> No geo change detected for disk 0 (128)
.../000:21/WAS> AdmiSectors in use : 0+
.../000:21/GSC> Geo for disk 0 (128) saved as 0078165360255063
128/000:21/USD> MBR for disk 0 (128)
128/000:21/LOG> SectorDump requested at 0 (0 0 1)
###
000   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
016   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
032   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
048   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
064   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
096   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
112   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
128   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
144   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
176   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
192   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
208   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
224   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
240   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
256   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
272   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
288   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
304   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
320   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
336   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
352   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
368   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 00 00 00 0B 07 0B 07 00 00 80 01  |  ..............?.
448   01 00 07 FE FF FF 3F 00 00 00 C1 52 A8 04 00 00  |  ...?..?...?R?...
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
128/000:23/VEC> Start Verify EPBR Chain for disk 0 (128)
128/000:23/VEC> Listing current partitions on disk:
128/000:23/VEC>     NTFS (P)    (no name)          63    78140097      (37 Gb)
128/000:23/VEC> Partition Table info for sector 0 (0 0 1)
128/000:23/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 .128 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/000:24/VEC> 55AA sig Ok
128/000:24/LOG> Boot sector dump requested at 63 (0 1 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 63
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 78140096
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 4883756
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 66F0EB08F0EADD75
........Volume Label (txt): (no name)
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/000:24/VEC> BS and BBS equal
128/000:24/VEC> Verify EPBR Chain completed
128/000:24/USD> Select disk completed
128/000:28/MNU> - Main, Repairs
128/000:33/MNU> - Repair, Rebuild Partition Tables
128/000:37/SCN> DiskScan requested, ScanType is 1
128/000:37/SCN> from 0 (0 0 1) to 78165359 (4865 144 63), 78165360 sectors
128/000:37/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/000:37/SCN> Next QuickScan location at 78140160 (4864 0 1)
128/000:38/SCN> Next QuickScan location at 0 (0 0 1)
128/000:38/SCN> QuickScan finished
128/000:38/SCN> DiskScan completed
128/000:38/SCN> ReadErrors for disk 0 (128): 0
128/000:40/LOG> DataCollection items found: 2 / 0
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
128/000:41/LOG> DataCollection items found: 2 / 0
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
128/000:41/LOG> PartList items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ... | ..1 | ..2 | --- | ..1 | ..1 | ..1 | 2 | ..A
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | ..A
128/000:41/EXE> Partially scanned disk, StateFile not saved
128/000:55/MRL> User abort MakeRSQPartList
128/000:55/EXE> Repair discontinued
128/001:04/MNU> - Repair, Rebuild Partition Tables
128/001:07/SCN> DiskScan requested, ScanType is 3
128/001:07/SCN> from 0 (0 0 1) to 78165359 (4865 144 63), 78165360 sectors
128/001:07/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/001:07/SCN> Next QuickScan location at 78140160 (4864 0 1)
128/001:07/SCN> Next QuickScan location at 0 (0 0 1)
128/001:08/SCN> QuickScan finished
128/001:08/SCN> Starting SmartScan (pre-vista) at 0 (0 0 1) (JMP=16065, RNG=63)
128/003:04/SCN> SmartScan finished
128/003:04/SCN> DiskScan completed
128/003:04/SCN> ReadErrors for disk 0 (128): 0
128/003:06/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI | .
004 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | I
005 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | I
128/003:07/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI
128/003:07/LOG> PartList items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ..3 | ..1 | ..2 | --- | ..3 | ..3 | ..3 | 3 | ..A
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | ..A
128/003:07/SST> SaveState requested for disk 0 (128)
128/003:11/WAS> AdmiSectors in use : 0+
128/003:12/SST> SaveState completed for disk 0 (128)
128/004:07/MRL> User select partition 1 for Repair
128/004:22/MRL> User abort MakeRSQPartList
128/004:22/EXE> Repair discontinued
128/004:25/MNU> - Repair, Rebuild Boot Sectors
128/004:31/UND> New Undo archive created for disk 0 (128)
128/004:31/LOG> Undo settings: GL(+) DE(+) FAT(+)
128/004:46/CBS> Checking validity for NTFS BS at 63 (0 1 1)
128/004:46/CBS> I: 1st sector for MFT/MFTmirror equal
128/004:47/CBS> No anomalies found
128/004:47/CBS> Check completed
128/004:47/CBS> BS passed validation, no repairs needed
128/005:17/CBS> Boot sector repair skipped
128/005:30/UND> Undo archive discarded, no sectors saved
128/005:34/MNU> - Main, MBR ops
128/005:36/CPA> Start Change Partition Attributes, dump follows;
128/005:36/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 .128 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/005:44/CPA> Change Partition Attributes aborted
128/006:07/MNU> - Main, Options
128/006:17/MNU> - Support, Analyze Disk (no repair, create log)
128/006:19/SCN> DiskScan requested, ScanType is 3
128/006:19/SCN> from 0 (0 0 1) to 78165359 (4865 144 63), 78165360 sectors
128/006:20/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/006:20/SCN> Next QuickScan location at 78140160 (4864 0 1)
128/006:21/SCN> Next QuickScan location at 0 (0 0 1)
128/006:21/SCN> QuickScan finished
128/006:21/SCN> Starting SmartScan (pre-vista) at 0 (0 0 1) (JMP=16065, RNG=63)
128/008:16/SCN> SmartScan finished
128/008:16/SCN> DiskScan completed
128/008:16/SCN> ReadErrors for disk 0 (128): 0
128/008:19/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI | .
004 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | I
005 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | I
128/008:20/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI
128/008:20/LOG> PartList items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ..3 | ..1 | ..2 | --- | ..3 | ..3 | ..3 | 3 | ..A
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | ..A
128/008:20/SST> SaveState requested for disk 0 (128)
128/008:22/WAS> AdmiSectors in use : 0+
128/008:23/SST> SaveState completed for disk 0 (128)
128/008:23/EXE> Analysis complete
128/008:29/MNU> - Main, Quit
128/008:29/LOG> RunTime: 008:29
128/008:29/LOG> ### CLOSE LOG ###
Logged
Tom
Developer and Support Tech
Administrator
member
*****
Posts: 1476


WWW
« Reply #3 on: June 04, 2008, 03:18:24 PM »

The log doesn't show the repair operations, but does show you running the boot sector repair operation. That was not necessary.
Please make sure you do these things:

http://www.diydatarecovery.nl/dp_manual/guide_ptrepair.htm
http://www.diydatarecovery.nl/dp_manual/guide_mbrrefresh.htm
http://www.diydatarecovery.nl/dp_manual/guide_partattr.htm

Then, if problems persist, run a clean support analysis and post that. Just the analysis log.
Logged

lasernat
member

Posts: 12


« Reply #4 on: June 04, 2008, 03:53:17 PM »

I still have the same problem. I went through it exactly as I did before here is the log. Thanks.

Code:
.../000:03/LOG> ### LOG START ###
.../000:03/LOG> DISKPATCH 3.4.100
.../000:03/LOG> (C) 2000-2008 DIY DataRecovery
.../000:03/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:03/LOG> MemFree: 76Kb
.../000:03/LOG> CommandLineParms:
.../000:03/LOG> LogDate: 06-04-2008
.../000:03/CFG> FilePath="1/.\DPFILES\"
.../000:03/CFG> LogFilename="DP.LOG"
.../000:03/CFG> ReadRetries="32"
.../000:03/CFG> WriteRetries="32"
.../000:03/CFG> MaxReadErrors="32"
.../000:03/CFG> MaxWriteErrors="1"
.../000:03/CFG> ReadDelay="0"
.../000:03/CFG> VfyFixedBadSect="1"
.../000:03/CFG> CleanAfterDOD="1"
.../000:03/CFG> DiskReset="1"
.../000:03/CFG> SectorSkip="1024"
.../000:03/CFG> AutoSaveState="1"
.../000:03/CFG> DumpFoundSectors="0"
.../000:03/CFG> FixFats="1"
.../000:03/CFG> MaxFatScan="51200"
.../000:03/CFG> MaxDataColEntries="256"
.../000:03/CFG> IgnoreF8FF="0"
.../000:03/CFG> DownSizeExt="1"
.../000:03/CFG> ScanSignature="55AA"
.../000:03/CFG> Rebuild="00"
.../000:03/13H> Ext13H installed test requested
.../000:03/13H> Disk found at 128
.../000:03/13H> Ext13H version: 2.1 / EDD-1.1
.../000:03/13H> Ext13H Support: Extended disk access functions
.../000:03/13H> Ext13H Support: Enhanced disk drive functions
.../000:03/13H> Drive Interface Info :
.../000:03/13H> Disk 128 X13H data : 0/0/0 78165360/512
.../000:03/13H> Ext13H tested ok
.../000:03/FDL> DiskList requested
.../000:03/FDL> Disk found at 128
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | ..78165360 | 255 | 63 | .37
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:04/IAS> AdmiSector found on disk 0 (128)
.../000:04/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:04/WAS> AdmiSectors in use : 0+
.../000:05/KEY> DECKERT/4
.../000:05/PFC> UDMA driver active
.../000:05/PFC> PQstuff signature not detected on disk 0 (128)
.../000:06/PFC> Partition State backup not found on disk 0 (128)
.../000:06/PFC> Last Repair (R) for disk 0 (128) performed on 06042008/091837
.../000:13/MNU> - Main, Select Disk
.../000:18/CSD> Start CheckDisk for disk 0 (128)
.../000:18/CSD> CheckDisk complete, ReadErrors 0
.../000:18/USD> Disk 0 (128) selected
.../000:18/GSC> No geo change detected for disk 0 (128)
.../000:18/WAS> AdmiSectors in use : 0+
.../000:18/GSC> Geo for disk 0 (128) saved as 0078165360255063
128/000:18/USD> MBR for disk 0 (128)
128/000:18/LOG> SectorDump requested at 0 (0 0 1)
###
000   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
016   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
032   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
048   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
064   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
096   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
112   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
128   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
144   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
176   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
192   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
208   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
224   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
240   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
256   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
272   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
288   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
304   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
320   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
336   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
352   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
368   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 00 00 00 0B 07 0B 07 00 00 80 01  |  ..............?.
448   01 00 07 FE FF FF 3F 00 00 00 C1 52 A8 04 00 00  |  ...?..?...?R?...
464   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
128/000:20/VEC> Start Verify EPBR Chain for disk 0 (128)
128/000:20/VEC> Listing current partitions on disk:
128/000:20/VEC>     NTFS (P)    (no name)          63    78140097      (37 Gb)
128/000:20/VEC> Partition Table info for sector 0 (0 0 1)
128/000:20/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 .128 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/000:20/VEC> 55AA sig Ok
128/000:20/LOG> Boot sector dump requested at 63 (0 1 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 63
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 78140096
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 4883756
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 66F0EB08F0EADD75
........Volume Label (txt): (no name)
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/000:20/VEC> BS and BBS equal
128/000:20/VEC> Verify EPBR Chain completed
128/000:21/USD> Select disk completed
128/000:23/MNU> - Main, Repairs
128/000:27/MNU> - Repair, Rebuild Partition Tables
128/000:31/SCN> DiskScan requested, ScanType is 3
128/000:31/SCN> from 0 (0 0 1) to 78165359 (4865 144 63), 78165360 sectors
128/000:31/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/000:31/SCN> Next QuickScan location at 78140160 (4864 0 1)
128/000:32/SCN> Next QuickScan location at 0 (0 0 1)
128/000:32/SCN> QuickScan finished
128/000:32/SCN> Starting SmartScan (pre-vista) at 0 (0 0 1) (JMP=16065, RNG=63)
128/002:28/SCN> SmartScan finished
128/002:29/SCN> DiskScan completed
128/002:29/SCN> ReadErrors for disk 0 (128): 0
128/016:42/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | .
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | .
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI | .
004 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI | I
005 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI | I
128/016:44/LOG> DataCollection items found: 5 / 2
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
001 | 128 | ........63 | ...NTFS | ..BS | ........63 | ..78140097 | PRI
002 | 128 | ..78140159 | ...NTFS | .BBS | ........63 | ..78140097 | PRI
003 | 128 | .........0 | ...NTFS | PTE1 | ........63 | ..78140097 | PRI
128/016:44/LOG> PartList items created: 1
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ..3 | ..1 | ..2 | --- | ..3 | ..3 | ..3 | 3 | ..A
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ........63 | ..78140097 | ..78140159 | PRI | ..A
128/016:44/SST> SaveState requested for disk 0 (128)
128/016:47/WAS> AdmiSectors in use : 0+
128/016:48/SST> SaveState completed for disk 0 (128)
128/016:54/MRL> User select partition 1 for Repair
128/017:12/UND> New Undo archive created for disk 0 (128)
128/017:12/LOG> Undo settings: GL(+) DE(+) FAT(+)
128/017:12/PTR> MBR PTEs wiped (patch)
128/017:14/RSQ> Start Recreate Primary Partition Table Entries
128/017:14/CPE> PTE (MBR) created for PartList entry 1 at 0 (0 0 1)
128/017:14/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/017:16/RSQ> Start Reconnecting Extended/Logicals Partitions
128/017:17/RCL> No logicals, PTE repair ends
128/017:17/RSQ> Start Sorting MBR Entries
128/017:17/CPE> MBR PTE sorting completed
128/017:17/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/017:19/RSQ> Start Simple BS Repair
128/017:20/SBF> +BS/+BBS for NTFS PartList entry 1
128/017:20/SBF> +BS/+BBS equal for NTFS PartList entry 1
128/017:20/WAS> AdmiSectors in use : 0+
128/017:20/RSQ> RSQ completed
128/017:30/WAS> AdmiSectors in use : 0+
128/017:33/UND> Undo archive saved
128/017:34/EXE> VfyEpbrChain requested for Post-Repair Analysis
128/017:34/VEC> Start Verify EPBR Chain for disk 0 (128)
128/017:34/VEC> Listing current partitions on disk:
128/017:34/VEC>     NTFS (P)    (no name)          63    78140097      (37 Gb)
128/017:34/VEC> Partition Table info for sector 0 (0 0 1)
128/017:34/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/017:34/VEC> 55AA sig Ok
128/017:34/LOG> Boot sector dump requested at 63 (0 1 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 63
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 78140096
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 4883756
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 66F0EB08F0EADD75
........Volume Label (txt): (no name)
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/017:34/VEC> BS and BBS equal
128/017:34/VEC> Verify EPBR Chain completed
128/017:43/MNU> - Main, Disk Ops
128/017:47/MNU> - Main, MBR ops
128/017:48/CPA> Start Change Partition Attributes, dump follows;
128/017:48/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/017:53/CPA> Partition 1 set Active
128/017:55/CPA> Change Partition Attributes complete, dump follows;
128/017:56/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 .128 | ..07 | ....0...1...1 | .1023.254..63 | ........63 | ..78140097
..2 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/018:02/MNU> - Main, Quit
128/018:02/LOG> RunTime: 018:02
128/018:02/LOG> ### CLOSE LOG ###
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #5 on: June 04, 2008, 04:29:06 PM »

Hello,

Well for some reason, there's still no boot code in the MBR. Can you try that again? So select the appropriate disk > goto MBR related tasks > refresh boot code. According to the logfiles you didn't do that yet.

If that does not do the trick then that would be really weird ... but then you could try FixMBR from the Windows recovery console.
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
lasernat
member

Posts: 12


« Reply #6 on: June 04, 2008, 05:43:46 PM »

Thank you that did the trick. What is the difference from repair mbr and refresh? Does repair use the existing for the repair and refresh put in a generic?
Logged
Tom
Developer and Support Tech
Administrator
member
*****
Posts: 1476


WWW
« Reply #7 on: June 05, 2008, 11:23:46 AM »

Well, from a diskpatch point of view:
Repair/Rebuild is creating a fresh mbr from scratch, that includes the partition tables. So the disk needs to be analyzed to find the partitions to create a new table.
Refresh is just the act of writing new boot code to the mbr. So other stuff in the mbr is left alone. DiskPatch doesn't automatically write boot code to a mbr after a repair, so you have to do that manually afterwards (this is by design).
Logged

Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!