My disk's S.M.A.R.T. health is zero. Hopefully data can be recovered?

[greycell]

Hi,

My hard disk failed while it windows was running, resulting in a blue screen.

Ever since it makes an unhealthy sound when the disk is switched on.  I have copied the support analysis log below.

Can you please check with DiskPatch can help to clone the data?

Thanks!


.../000:18/LOG> ### LOG START ###
.../000:18/LOG> DISKPATCH 3.5.300
.../000:18/LOG> (C) 2000-2009 DIY DataRecovery
.../000:18/LOG> Contact info: http://HTTP://www.DIYDataRecovery.nl
.../000:18/LOG> MemFree: 67Kb
.../000:18/LOG> CommandLineParms: /sup
.../000:18/LOG> LogDate: 05-10-2010
.../000:18/CFG> FilePath="C:DPFILES\"
.../000:18/CFG> ReadRetries="32"
.../000:18/CFG> WriteRetries="32"
.../000:18/CFG> MaxReadErrors="32"
.../000:18/CFG> MaxWriteErrors="1"
.../000:18/CFG> LogEachReadError="1"
.../000:18/CFG> ReadDelay="0"
.../000:18/CFG> VfyFixedBadSect="1"
.../000:18/CFG> CleanAfterDOD="1"
.../000:18/CFG> DiskReset="1"
.../000:18/CFG> SectorSkip="1024"
.../000:18/CFG> AutoSaveState="1"
.../000:18/CFG> DumpFoundSectors="0"
.../000:18/CFG> FixFats="1"
.../000:18/CFG> MaxFatScan="51200"
.../000:18/CFG> MaxDataColEntries="256"
.../000:18/CFG> IgnoreF8FF="0"
.../000:18/CFG> DownSizeExt="1"
.../000:18/CFG> ScanSignature="55AA"
.../000:18/CFG> Rebuild="00"
.../000:18/13H> Ext13H installed test requested
.../000:18/13H> Disk found at 128
.../000:18/13H> Ext13H version: EDD-3.0
.../000:18/13H> Ext13H Support: Extended disk access functions
.../000:18/13H> Ext13H Support: Enhanced disk drive functions
.../000:18/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:18/13H> Drive Interface Info:
.../000:18/13H> Disk 128 X13H data : 16383/16/63 195371568/512
.../000:18/13H> Disk found at 129
.../000:18/13H> Ext13H version: EDD-3.0
.../000:18/13H> Ext13H Support: Extended disk access functions
.../000:18/13H> Ext13H Support: Enhanced disk drive functions
.../000:18/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:18/13H> Drive Interface Info:
.../000:18/13H> Disk 129 X13H data : 16383/16/63 234441648/512
.../000:18/13H> Disk found at 130
.../000:18/13H> Ext13H version: EDD-3.0
.../000:18/13H> Ext13H Support: Extended disk access functions
.../000:18/13H> Ext13H Support: Removable drive controller functions
.../000:18/13H> Ext13H Support: Enhanced disk drive functions
.../000:18/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:18/13H> Ext13H Flags: Cylinder/head/sector info is valid
.../000:18/13H> Drive Interface Info:
.../000:18/13H> Disk 130 X13H data : 122/255/63 1974272/512
.../000:18/13H> Ext13H tested ok
.../000:18/FDL> DiskList requested
.../000:18/FDL> Disk found at 128
.../000:18/FDL> Disk found at 129
.../000:18/FDL> Disk found at 130
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB_|__GEO
128 | .195371568 | 255 | 63 | .93 | BIOS
129 | .234441648 | 255 | 63 | 111 | BIOS
130 | ...1974272 | 255 | 63 | ..0 | BIOS
..0 | .........0 | ..0 | .0 | ..0 | BIOS
.../000:18/IAS> AdmiSector found on disk 0 (128)
.../000:18/IAS> AdmiSector init complete for disk 1 (129)
.../000:18/IAS> AdmiSector init complete for disk 2 (130)
.../000:19/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:19/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:20/EXE> Read/Write pattern test for disk 2 (130) successful
.../000:20/WAS> AdmiSectors in use : 0+ 1+ 2+
.../000:20/KEY> DEMO/1
.../000:20/PFC> PQstuff signature not detected on disk 0 (128)
.../000:20/PFC> PQstuff signature not detected on disk 1 (129)
.../000:20/PFC> PQstuff signature not detected on disk 2 (130)
.../000:20/PFC> UDMA driver not loaded
.../000:20/PFC> Disk health 1-50
.../000:22/PFC> Partition State backup not found on disk 0 (128)
.../000:22/PFC> Partition State backup not found on disk 1 (129)
.../000:22/PFC> Partition State backup not found on disk 2 (130)
.../000:22/PFC> No Repair date found on disk 0 (128)
.../000:22/PFC> No Repair date found on disk 1 (129)
.../000:22/PFC> No Repair date found on disk 2 (130)
.../001:25/CSD> Start CheckDisk for disk 0 (128)
.../001:52/RDS> ReadError for disk 128 at 195366465 (12161 0 1), C:1, T:10h
.../010:06/RDS> ReadError for disk 128 at 195366466 (12161 0 2), C:2, T:02h
.../018:15/RDS> ReadError for disk 128 at 195366468 (12161 0 4), C:3, T:10h
.../027:52/RDS> ReadError for disk 128 at 195371564 (12161 80 60), C:4, T:80h
.../028:59/RDS> ReadSector success (after error) at 195371564 (12161 80 60), tries 2
.../030:02/RDS> ReadError for disk 128 at 195371565 (12161 80 61), C:4, T:80h
.../056:34/CSD> CheckDisk complete, ReadErrors 2
.../056:34/USD> Disk 0 (128) selected
.../056:34/GSC> First DP run, geo info for disk 0 (128) not yet recorded
.../056:34/WAS> AdmiSectors in use : 0+ 1+ 2+
128/056:34/USD> MBR for disk 0 (128)
128/056:34/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 FF BE 00 02 8E D7 BC 00 7A BB A0 07 8B CE 8E  |  3.?..??.z? .??
016   DB 8E C3 F3 A4 EA 7A 00 A0 07 10 00 01 00 00 7A  |  ??z. ......z
032   00 00 00 00 00 00 00 00 00 00 66 8B 55 08 B4 42  |  ..........f?U.?B
048   C6 06 1F 00 7C 32 C0 66 89 16 22 00 BE 1A 00 B2  |  ?...|2?f?.".?..?
064   80 CD 13 0F 82 E7 00 81 3E FE 03 55 AA C3 AC 0A  |  ??..??.?>?.U?ì.
080   C0 74 FA B4 0E BB 07 00 CD 10 EB F2 33 C9 E4 64  |  ?t??.?..?.??3??d
096   A8 02 E0 FA C3 B8 12 5F 66 BA 51 50 48 5F CD 15  |  ?.??ø._f?QPH_?.
112   73 02 33 DB 80 E3 01 0A DB C3 8B E9 8B D9 89 0E  |  s.3??..?Ë???.
128   00 04 88 2E B4 01 FA E8 D2 FF B0 AD E6 64 E8 CB  |  ..?.?..???d??
144   FF B0 94 E6 64 33 C9 E4 64 A8 01 E1 FA E4 60 3C  |  .???d3??d?.`<
160   05 73 03 A2 B4 01 FB E8 B2 FF B0 AE E6 64 BF EE  |  .s.??..???d??
176   01 B9 04 00 38 6D 04 74 3E E8 6E FF 75 26 66 81  |  .?..8m.t>?n.u&f?
192   3E F0 03 51 50 4C 59 75 0A C6 45 04 07 89 3E 00  |  >?.QPLYu.?E..?>.
208   04 EB 24 66 81 3E 03 02 52 45 43 4F 75 06 8B DF  |  .?$f?>..RECOu.??
224   C6 45 04 0C 8A 45 04 3C 07 74 0A 3C 0B 74 06 24  |  ?E..?E.<.t.<.t.$
240   F5 3C 04 75 02 8B EF 88 2D 83 EF 10 E2 B6 0B DB  |  ?<.u.-??.??.?
256   74 41 8B FB F6 06 8F 01 04 75 30 F6 06 8F 01 02  |  tA???.?..u0?.?..
272   75 31 E8 50 FF 75 24 EB 2A 66 33 D2 E8 0F FF B1  |  u1?P.u$?*f3??..?
288   04 BF BE 03 80 3D 80 74 53 83 C7 10 E2 F6 8B 36  |  .??.?=?tS??.???6
304   92 01 E8 19 FF B4 00 CD 16 CD 18 8B EF 0B ED 74  |  ?.?..?.?.?.??.?t
320   D8 EB 22 8B 16 00 04 0B D2 74 1A A0 B4 01 3C 01  |  ??"?....?t. ?.<.
336   77 08 8B FA C6 45 04 D7 EB 0B 8B EA EB 07 F6 06  |  w.???E.??..?.
352   8F 01 10 74 00 8B FD C6 05 80 80 26 8F 01 F9 66  |  ?..t..??&?.?f
368   33 D2 C6 06 1F 00 7A B4 43 E8 B9 FE E8 AB FE 8B  |  3??...z?C?
384   36 90 01 75 AD EA 00 7C 00 00 20 0D 0A 00 00 50  |  6?.u??.|.. ....P
400   00 00 98 01 00 00 00 00 0D 0A 4D 42 52 20 45 72  |  ..?.......MBR Er
416   72 6F 72 0D 0A 00 00 FF 00 00 00 00 00 00 00 00  |  ror.............
432   00 00 00 00 01 00 8E 01 37 4D 38 4D 00 00 80 01  |  ......?.7M8M..?.
448   01 00 07 FE FF FE 3F 00 00 00 BC BF 3A 0A 00 00  |  ...?.??...??:...
464   C1 FE 07 FE FF FE FB BF 3A 0A 83 31 4A 01 00 00  |  ??.?.:.?1J...
480   C1 FE D7 FE FF FE 7E F1 84 0B C3 1C 20 00 00 00  |  ?.?~??.?. ...
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............U?
###
128/056:34/VEC> Start Verify EPBR Chain for disk 0 (128)
128/056:34/VEC> Listing current partitions on disk:
128/056:34/VEC>     NTFS (P)    (no name)          63   171622332      (82 Gb)
128/056:34/VEC>     NTFS (P)     Projects   171622395    21639555      (10 Gb)
128/056:34/VEC>  UNKNOWN (P)    (no name)   193261950     2104515       (1 Gb)
128/056:34/VEC> Partition Table info for sector 0 (0 0 1)
128/056:34/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 .128 | ..07 | ....0...1...1 | .1022.254..63 | ........63 | .171622332
..2 ...0 | ..07 | .1022...0...1 | .1022.254..63 | .171622395 | ..21639555
..3 ...0 | ..D7 | .1022...0...1 | .1022.254..63 | .193261950 | ...2104515
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/056:34/VEC> 55AA sig Ok
128/056:34/LOG> Boot sector dump requested at 63 (0 1 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 63
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 171622331
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 10838850
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): D034C7EB34C7D320
........Volume Label (txt): (no name)
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/056:34/VEC> BS and BBS equal
128/056:34/LOG> Boot sector dump requested at 171622395 (10683 0 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 1
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 171622395
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 21639554
........MFT Location (dec): 6291456
.MFT Mirror Location (dec): 10819777
....Clusters per FRS (dec): 2
.Clusters/Indx Block (dec): 8
...........Volume ID (hex): 0694B18C94B17F2D
........Volume Label (txt): Projects
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/056:34/VEC> BS and BBS equal
128/056:34/LOG> Boot sector dump requested at 193261950 (12030 0 1)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 4
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 193261950
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 2104514
........MFT Location (dec): 175376
.MFT Mirror Location (dec): 263064
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 2
...........Volume ID (hex): A0947FB5947F8C92
........Volume Label (txt): (no name)
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/056:48/RDS> ReadError for disk 128 at 195366464 (12160 254 63), C:5, T:10h
128/064:27/VEC> BS and BBS not equal, dump follows;
128/064:27/LOG> Boot sector dump requested at 195366464 (12160 254 63)
128/064:27/LOG> !- Sector 195366464 (12160 254 63) not read
128/064:27/VEC> Verify EPBR Chain completed
128/064:28/USD> Select disk completed
128/076:18/SCN> DiskScan requested, ScanType is 3
128/076:18/SCN> from 0 (0 0 1) to 195371567 (12161 80 63), 195371568 sectors
128/076:18/SCN> Starting QuickScan (pre-vista) at 63 (0 1 1)
128/076:18/SCN> Next QuickScan location at 171622395 (10683 0 1)
128/076:27/SCN> Next QuickScan location at 193261950 (12030 0 1)
128/076:37/RDS> ReadError for disk 128 at 193261888 (12029 254 2), C:6, T:10h
128/083:43/RDS> ReadError for disk 128 at 193261889 (12029 254 3), C:7, T:02h
128/090:51/RDS> ReadError for disk 128 at 193261890 (12029 254 4), C:8, T:10h
128/097:38/RDS> ReadError for disk 128 at 193261896 (12029 254 10), C:9, T:10h
128/104:19/RDS> ReadError for disk 128 at 193261899 (12029 254 13), C:10, T:10h
128/111:19/RDS> ReadError for disk 128 at 193261900 (12029 254 14), C:11, T:02h
128/117:13/RDS> ReadError for disk 128 at 193261912 (12029 254 26), C:12, T:10h
128/123:56/RDS> ReadError for disk 128 at 193261919 (12029 254 33), C:13, T:10h
128/129:55/RDS> ReadError for disk 128 at 193261920 (12029 254 34), C:14, T:02h
128/135:44/RDS> ReadError for disk 128 at 193261921 (12029 254 35), C:15, T:10h
128/142:15/RDS> ReadError for disk 128 at 193261935 (12029 254 49), C:16, T:02h
128/148:03/RDS> ReadError for disk 128 at 193261938 (12029 254 52), C:17, T:10h
128/154:34/RDS> ReadError for disk 128 at 193261942 (12029 254 56), C:18, T:10h
128/160:30/RDS> ReadError for disk 128 at 193261945 (12029 254 59), C:19, T:10h
128/166:02/RDS> ReadError for disk 128 at 193261946 (12029 254 60), C:20, T:10h
128/168:48/RDS> ReadSector success (after error) at 193261946 (12029 254 60), tries 17
128/168:56/RDS> ReadError for disk 128 at 193261947 (12029 254 61), C:20, T:10h
128/170:01/RDS> ReadSector success (after error) at 193261947 (12029 254 61), tries 7
128/170:15/RDS> ReadError for disk 128 at 193261953 (12030 0 4), C:20, T:10h
128/176:09/RDS> ReadError for disk 128 at 193261957 (12030 0 , C:21, T:10h
128/181:32/RDS> ReadError for disk 128 at 193261959 (12030 0 10), C:22, T:10h
128/186:55/RDS> ReadError for disk 128 at 193261983 (12030 0 34), C:23, T:10h
128/192:19/RDS> ReadError for disk 128 at 193261997 (12030 0 48), C:24, T:10h
128/197:51/RDS> ReadError for disk 128 at 193262003 (12030 0 54), C:25, T:10h
128/204:20/RDS> ReadError for disk 128 at 193262004 (12030 0 55), C:26, T:10h
128/209:56/RDS> ReadError for disk 128 at 193262005 (12030 0 56), C:27, T:10h
128/215:41/RDS> ReadError for disk 128 at 193262007 (12030 0 58), C:28, T:02h
128/221:08/RDS> ReadError for disk 128 at 193262011 (12030 0 62), C:29, T:10h
128/221:35/RDS> ReadSector success (after error) at 193262011 (12030 0 62), tries 3
128/221:44/RDS> ReadError for disk 128 at 193262012 (12030 0 63), C:29, T:10h
128/227:02/RDS> ReadError for disk 128 at 193262014 (12030 1 2), C:30, T:02h
128/232:17/RDS> ReadError for disk 128 at 193262016 (12030 1 4), C:31, T:10h
128/237:43/RDS> ReadError for disk 128 at 193262018 (12030 1 6), C:32, T:10h
128/243:02/RDS> Maximum (32) allowed ReadErrors reached at 193262018 (12030 1 6)
128/999:54/HRE> Disable MaxReadErrors after MaxReadErrors reached at 193262018 (12030 1 6)
128/999:68/RDS> ReadError for disk 128 at 193262020 (12030 1 , C:33, T:10h
128/999:05/RDS> ReadError for disk 128 at 193262021 (12030 1 9), C:34, T:10h
128/999:33/RDS> ReadError for disk 128 at 193262022 (12030 1 10), C:35, T:02h
128/999:78/RDS> ReadError for disk 128 at 193262032 (12030 1 20), C:36, T:02h
128/999:06/RDS> ReadError for disk 128 at 193262039 (12030 1 27), C:37, T:10h
128/999:32/RDS> ReadError for disk 128 at 193262041 (12030 1 29), C:38, T:10h
128/999:13/RDS> ReadError for disk 128 at 193262052 (12030 1 40), C:39, T:10h
128/999:02/RDS> ReadError for disk 128 at 193262053 (12030 1 41), C:40, T:10h
128/999:80/RDS> ReadError for disk 128 at 193262055 (12030 1 43), C:41, T:02h
128/999:47/RDS> ReadError for disk 128 at 193262056 (12030 1 44), C:42, T:10h
128/999:01/RDS> ReadError for disk 128 at 193262070 (12030 1 58), C:43, T:10h
128/999:89/RDS> ReadError for disk 128 at 193262072 (12030 1 60), C:44, T:10h
128/999:45/SCN> Next QuickScan location at 195366465 (12161 0 1)
128/999:45/SCN> DiskScan aborted at JumpSector 193261950 (12030 0 1)
128/999:45/EXE> Analysis aborted
128/999:45/LOG> RunTime: 999:45
128/999:45/LOG> ### CLOSE LOG ###

[Joep]

Hello,

If the disk is in really bad shape then there is no other option than trying to clone it as soon as possible. If the data on the disk is absolutely mission cirtical you should consider sending the disk to a data recovery lab. That is especially true if the disk makes lots of bad noises.

That being said, Diskpatch will always try to clone the disk trying to put as little stress on the disk as possible.

[greycell]

Thanks for the quick reply.  The errors in the support analysis seemed to indicate that errors were in the higher sectors of the disk. The data is really nice to have but not critical. Can DiskPatch copy the data in the other sectors to another drive?

Thanks

[Joep]

Hello,

Yes, but the scan was only a partial scan + even the full scan does not read each and every sector of the disk. To gain a full picture you should run a surface scan. However, this is as 'aggressive' as cloning so I would clone immediately. By aggressive I mean that for a disk in a certain state every read can be an 'act of aggression', everything you do with the disk is stress.

The idea is indeed that DiskPatch copies all data from all sectors it can read to another disk.

[greycell]

I have bought a DiskPatch licence.  I am trying to start cloning, but it's been about 30mins since I selected the source disk and DiskPatch is stuck with the box "Reading Disk". It was able to display the disk partitions before I tried to select the disk.

How can I move things along?

[Joep]

Hello,

DiskPatch does some checks on the selected disk and it seems it is hanging while doing that. if it did get past this point before it may indicate that the disk's condition is deteriorating.

In the DiskPatch startmenu select Diskpatch options (troubleshooting) and then 'skip initial disk checks', and if it turns out that is not enough, select 'skip both disk and general checks'. DiskPatch should now skip the checks that cause the program to hang.

[greycell]

Hi,

Diskpatch has been running for more than 9 days straight now and has seems to have stalled around the 53% point for more than 2 days.

I ran out of patience and tried to abort DiskPatch but it did not respond. After some minutes, I reset the computer.  I have found that there are files in the sectors recovered by Diskpatch so far.

Is there a way to resume diskpatch from the 53% position while using the same target disk?  I have not written to either the defective disk or the disk I am restoring to.

Thanks.

Here are the logs. Those not listed are empty:

=====
DP.L03
=====



.../000:09/LOG> ### LOG START ###
.../000:09/LOG> DISKPATCH 3.5.300
.../000:09/LOG> (C) 2000-2009 DIY DataRecovery
.../000:09/LOG> Contact info: http://HTTP://www.DIYDataRecovery.nl
.../000:09/LOG> MemFree: 67Kb
.../000:09/LOG> CommandLineParms: /dnc
.../000:09/LOG> LogDate: 05-12-2010
.../000:09/CFG> FilePath="C:DPFILES\"
.../000:09/CFG> ReadRetries="32"
.../000:09/CFG> WriteRetries="32"
.../000:09/CFG> MaxReadErrors="32"
.../000:09/CFG> MaxWriteErrors="1"
.../000:09/CFG> LogEachReadError="1"
.../000:09/CFG> ReadDelay="0"
.../000:09/CFG> VfyFixedBadSect="1"
.../000:09/CFG> CleanAfterDOD="1"
.../000:09/CFG> DiskReset="1"
.../000:09/CFG> SectorSkip="1024"
.../000:09/CFG> AutoSaveState="1"
.../000:09/CFG> DumpFoundSectors="0"
.../000:09/CFG> FixFats="1"
.../000:09/CFG> MaxFatScan="51200"
.../000:09/CFG> MaxDataColEntries="256"
.../000:09/CFG> IgnoreF8FF="0"
.../000:09/CFG> DownSizeExt="1"
.../000:09/CFG> ScanSignature="55AA"
.../000:09/CFG> Rebuild="00"
.../000:09/13H> Ext13H installed test requested
.../000:09/13H> Disk found at 128
.../000:09/13H> Ext13H version: EDD-3.0
.../000:09/13H> Ext13H Support: Extended disk access functions
.../000:09/13H> Ext13H Support: Enhanced disk drive functions
.../000:09/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:09/13H> Drive Interface Info:
.../000:09/13H> Disk 128 X13H data : 16383/16/63 195371568/512
.../000:09/13H> Disk found at 129
.../000:09/13H> Ext13H version: EDD-3.0
.../000:09/13H> Ext13H Support: Extended disk access functions
.../000:09/13H> Ext13H Support: Enhanced disk drive functions
.../000:09/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:09/13H> Drive Interface Info:
.../000:09/13H> Disk 129 X13H data : 16383/16/63 234441648/512
.../000:09/13H> Disk found at 130
.../000:09/13H> Ext13H version: EDD-3.0
.../000:09/13H> Ext13H Support: Extended disk access functions
.../000:09/13H> Ext13H Support: Removable drive controller functions
.../000:09/13H> Ext13H Support: Enhanced disk drive functions
.../000:09/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:09/13H> Ext13H Flags: Cylinder/head/sector info is valid
.../000:09/13H> Drive Interface Info:
.../000:09/13H> Disk 130 X13H data : 122/255/63 1974272/512
.../000:09/13H> Ext13H tested ok
.../000:09/FDL> DiskList requested
.../000:09/FDL> Disk found at 128
.../000:09/FDL> Disk found at 129
.../000:09/FDL> Disk found at 130
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB_|__GEO
128 | .195371568 | 255 | 63 | .93 | BIOS
129 | .234441648 | 255 | 63 | 111 | BIOS
130 | ...1974272 | 255 | 63 | ..0 | BIOS
..0 | .........0 | ..0 | .0 | ..0 | BIOS
.../000:09/IAS> AdmiSector found on disk 0 (128)
.../000:09/IAS> AdmiSector found on disk 1 (129)
.../000:09/IAS> AdmiSector found on disk 2 (130)
.../000:10/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:10/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:11/EXE> Read/Write pattern test for disk 2 (130) successful
.../000:11/WAS> AdmiSectors in use : 0+ 1+ 2+
.../000:11/KEY> 1812O9O253/4
.../000:11/PFC> PQstuff signature not detected on disk 0 (128)
.../000:11/PFC> PQstuff signature not detected on disk 1 (129)
.../000:11/PFC> PQstuff signature not detected on disk 2 (130)
.../000:11/PFC> UDMA driver not loaded
.../000:11/PFC> Disk health 1-50
.../000:13/PFC> Partition State backup not found on disk 0 (128)
.../000:13/PFC> Partition State backup not found on disk 1 (129)
.../000:13/PFC> Partition State backup not found on disk 2 (130)
.../000:13/PFC> No Repair date found on disk 0 (128)
.../000:13/PFC> No Repair date found on disk 1 (129)
.../000:13/PFC> No Repair date found on disk 2 (130)
.../000:24/MNU> - Main, Quit
.../000:24/LOG> RunTime: 000:24
.../000:24/LOG> ### CLOSE LOG ###


----------------------------------------------------------------------------

=====
DP.L04
======


.../000:05/LOG> ### LOG START ###
.../000:05/LOG> DISKPATCH 3.5.300
.../000:05/LOG> (C) 2000-2009 DIY DataRecovery
.../000:05/LOG> Contact info: http://HTTP://www.DIYDataRecovery.nl
.../000:05/LOG> MemFree: 67Kb
.../000:05/LOG> CommandLineParms:
.../000:05/LOG> LogDate: 05-12-2010
.../000:05/CFG> FilePath="C:DPFILES\"
.../000:05/CFG> ReadRetries="32"
.../000:05/CFG> WriteRetries="32"
.../000:05/CFG> MaxReadErrors="32"
.../000:05/CFG> MaxWriteErrors="1"
.../000:05/CFG> LogEachReadError="1"
.../000:05/CFG> ReadDelay="0"
.../000:05/CFG> VfyFixedBadSect="1"
.../000:05/CFG> CleanAfterDOD="1"
.../000:05/CFG> DiskReset="1"
.../000:05/CFG> SectorSkip="1024"
.../000:05/CFG> AutoSaveState="1"
.../000:05/CFG> DumpFoundSectors="0"
.../000:05/CFG> FixFats="1"
.../000:05/CFG> MaxFatScan="51200"
.../000:05/CFG> MaxDataColEntries="256"
.../000:05/CFG> IgnoreF8FF="0"
.../000:05/CFG> DownSizeExt="1"
.../000:05/CFG> ScanSignature="55AA"
.../000:05/CFG> Rebuild="00"
.../000:05/13H> Ext13H installed test requested
.../000:05/13H> Disk found at 128
.../000:05/13H> Ext13H version: EDD-3.0
.../000:05/13H> Ext13H Support: Extended disk access functions
.../000:05/13H> Ext13H Support: Enhanced disk drive functions
.../000:05/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:05/13H> Drive Interface Info:
.../000:05/13H> Disk 128 X13H data : 16383/16/63 195371568/512
.../000:05/13H> Disk found at 129
.../000:05/13H> Ext13H version: EDD-3.0
.../000:05/13H> Ext13H Support: Extended disk access functions
.../000:05/13H> Ext13H Support: Enhanced disk drive functions
.../000:05/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:05/13H> Drive Interface Info:
.../000:05/13H> Disk 129 X13H data : 16383/16/63 234441648/512
.../000:05/13H> Disk found at 130
.../000:05/13H> Ext13H version: EDD-3.0
.../000:05/13H> Ext13H Support: Extended disk access functions
.../000:05/13H> Ext13H Support: Removable drive controller functions
.../000:05/13H> Ext13H Support: Enhanced disk drive functions
.../000:05/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:05/13H> Ext13H Flags: Cylinder/head/sector info is valid
.../000:05/13H> Drive Interface Info:
.../000:05/13H> Disk 130 X13H data : 122/255/63 1974272/512
.../000:05/13H> Ext13H tested ok
.../000:05/FDL> DiskList requested
.../000:05/FDL> Disk found at 128
.../000:05/FDL> Disk found at 129
.../000:05/FDL> Disk found at 130
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB_|__GEO
128 | .195371568 | 255 | 63 | .93 | BIOS
129 | .234441648 | 255 | 63 | 111 | BIOS
130 | ...1974272 | 255 | 63 | ..0 | BIOS
..0 | .........0 | ..0 | .0 | ..0 | BIOS
.../000:05/IAS> AdmiSector found on disk 0 (128)
.../000:05/IAS> AdmiSector found on disk 1 (129)
.../000:05/IAS> AdmiSector found on disk 2 (130)
.../000:06/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:06/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:07/EXE> Read/Write pattern test for disk 2 (130) successful
.../000:07/WAS> AdmiSectors in use : 0+ 1+ 2+
.../000:07/KEY> 1812O9O253/4
.../000:07/PFC> PQstuff signature not detected on disk 0 (128)
.../000:07/PFC> PQstuff signature not detected on disk 1 (129)
.../000:07/PFC> PQstuff signature not detected on disk 2 (130)
.../000:07/PFC> UDMA driver not loaded
.../000:07/PFC> Disk health 1-50
.../000:08/PFC> Partition State backup not found on disk 0 (128)
.../000:08/PFC> Partition State backup not found on disk 1 (129)
.../000:08/PFC> Partition State backup not found on disk 2 (130)
.../000:08/PFC> No Repair date found on disk 0 (128)
.../000:08/PFC> No Repair date found on disk 1 (129)
.../000:08/PFC> No Repair date found on disk 2 (130)
.../000:15/MNU> - Main, Options
.../000:44/MNU> - Main, Options
.../000:56/MNU> - Main, Select Disk
.../000:58/USD> No source / disk selected
.../000:58/USD> Select disk completed
.../001:01/MNU> - Main, Options
.../006:47/MNU> - Main, Options
.../006:51/MNU> - Main, Quit
.../006:51/LOG> RunTime: 006:51
.../006:51/LOG> ### CLOSE LOG ###

[Tom]

Yes, simply enter a start and stop location when resuming the cloning. If you remembered the address location where DP aborted you can resume there, but if all you remembered is the 53% you'll simply have to calculate the address: 53% of the total number of disk sectors, and then maybe start a bit before that to make sure you're not missing anything. Or, if you suspect that the 53% mark is a particularly bad area, start a bit after that. You can also start at say 60% and see if that speeds things up, then try the remaining 7% later.