Disk 1 (129) can not be accessed!

[Sind]

Dear DIY,

I purchased your program after scanning initially my 2 HD's that I am having problem with. Here I will address only the one that is more pressing, the family pictures and documents. Yes I back up, unfortunately both computers are in the same location, my home, and a massive power surge took care of both disks, this has not happened here with the power in over 15 years, but that is another story.

Now for the problem. Diskpatch finds the disk and lists it, however when I run it, it never gets past the "Select Disk" state. It will read, with difficulty, and then return to the initial menu, not allowing access to any options.

This is the only log I have been able to muster up.

The Disk started making noise after the surge and I got a call from my wife informing me of the noise. I naturally asked her to shut the computer down ASAP.

When I came home I tried the disk (no unusual noise) and the BIOS sees it (windows did not), however there is no access to anything. I have NOT done any recovery attempts, such as FixMBR or sectors, as I wanted to clone the disk first to keep to nondestructive recovery. I was gong to use your program to accomplish this task, but am unable to get to complete the select disk process. I did 2 passes to try and on the first one I got green checks on all issues, but on the second there was a red exclamation mark for the disk health.

There was also an error stating "MBR not accessible".

Perhaps you can assist me to make further progress.

Below is the log that I was able to get.


.../000:15/LOG> ### LOG START ###
.../000:15/LOG> DISKPATCH 3.5.300
.../000:15/LOG> (C) 2000-2009 DIY DataRecovery
.../000:15/LOG> Contact info: http://HTTP://www.DIYDataRecovery.nl
.../000:15/LOG> MemFree: 73Kb
.../000:15/LOG> CommandLineParms:
.../000:15/LOG> LogDate: 12-17-2010
.../000:15/CFG> FilePath="C:DPFILES\"
.../000:15/CFG> ReadRetries="32"
.../000:15/CFG> WriteRetries="32"
.../000:15/CFG> MaxReadErrors="32"
.../000:15/CFG> MaxWriteErrors="1"
.../000:15/CFG> LogEachReadError="1"
.../000:15/CFG> ReadDelay="0"
.../000:15/CFG> VfyFixedBadSect="1"
.../000:15/CFG> CleanAfterDOD="1"
.../000:15/CFG> DiskReset="1"
.../000:15/CFG> SectorSkip="1024"
.../000:15/CFG> AutoSaveState="1"
.../000:15/CFG> DumpFoundSectors="0"
.../000:15/CFG> FixFats="1"
.../000:15/CFG> MaxFatScan="51200"
.../000:15/CFG> MaxDataColEntries="256"
.../000:15/CFG> IgnoreF8FF="0"
.../000:15/CFG> DownSizeExt="1"
.../000:15/CFG> ScanSignature="55AA"
.../000:15/CFG> Rebuild="00"
.../000:15/13H> Ext13H installed test requested
.../000:15/13H> Disk found at 128
.../000:15/13H> Ext13H version: 2.1 / EDD-1.1
.../000:15/13H> Ext13H Support: Extended disk access functions
.../000:15/13H> Ext13H Support: Enhanced disk drive functions
.../000:15/13H> Drive Interface Info:
.../000:15/13H> Disk 128 X13H data : 16383/16/63 1953525168/512
.../000:15/13H> Disk found at 129
.../000:15/13H> Ext13H version: 2.1 / EDD-1.1
.../000:15/13H> Ext13H Support: Extended disk access functions
.../000:15/13H> Ext13H Support: Enhanced disk drive functions
.../000:15/13H> Drive Interface Info:
.../000:15/13H> Disk 129 X13H data : 16383/16/63 625142448/512
.../000:15/13H> Disk found at 130
.../000:15/13H> Ext13H version: EDD-3.0
.../000:15/13H> Ext13H Support: Extended disk access functions
.../000:15/13H> Ext13H Support: Enhanced disk drive functions
.../000:15/13H> Ext13H Flags: Write with verify supported
.../000:15/13H> Drive Interface Info: USB
.../000:15/13H> Disk 130 X13H data : 31/255/63 502880/512
.../000:15/13H> Ext13H tested ok
.../000:15/FDL> DiskList requested
.../000:15/FDL> Disk found at 128
.../000:15/FDL> Disk found at 129
.../000:15/FDL> Disk found at 130
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB_|__GEO
128 | 1953525168 | 255 | 63 | 931 | BIOS
129 | .625142448 | 255 | 63 | 298 | BIOS
130 | ....502880 | 255 | 63 | ..0 | BIOS
..0 | .........0 | ..0 | .0 | ..0 | BIOS
.../000:15/RDS> ReadError for disk 129 at 0 (0 0 1), C:1, T:01h
.../000:48/IAS> AdmiSector found on disk 0 (128)
.../000:48/RDS> ReadError for disk 129 at 29 (0 0 30), C:2, T:01h
.../001:31/IAS> AdmiSector read error on disk 1 (129), not accessable
.../001:31/IAS> AdmiSector found on disk 2 (130)
.../001:32/EXE> Read/Write pattern test for disk 0 (128) successful
.../001:32/EXE> Read/Write pattern test for disk 2 (130) successful
.../001:32/WAS> AdmiSectors in use : 0+ 1- 2+
.../001:32/KEY> 1812O9O296/4
.../001:32/PFC> PQstuff signature not detected on disk 0 (128)
.../001:32/RDS> ReadError for disk 129 at 10 (0 0 11), C:3, T:01h
.../002:20/PFC> PQstuff signature not detected on disk 1 (129)
.../002:20/PFC> PQstuff signature not detected on disk 2 (130)
.../002:20/PFC> UDMA driver not loaded
.../002:20/PFC> Disk health 1-50
.../002:21/RDS> ReadError for disk 129 at 0 (0 0 1), C:4, T:01h
.../006:12/PFC> Partition State backup not found on disk 0 (128)
.../006:12/PFC> Partition State backup not found on disk 1 (129)
.../006:12/PFC> Partition State backup not found on disk 2 (130)
.../006:12/PFC> No Repair date found on disk 0 (128)
.../006:12/PFC> No Repair date found on disk 1 (129)
.../006:12/PFC> No Repair date found on disk 2 (130)
.../006:23/MNU> - Main, Select Disk
.../006:27/CSD> Start CheckDisk for disk 1 (129)
.../006:27/RDS> ReadError for disk 129 at 0 (0 0 1), C:5, T:01h
.../011:41/RDS> ReadError for disk 129 at 1 (0 0 2), C:6, T:01h
.../012:30/RDS> ReadError for disk 129 at 2 (0 0 3), C:7, T:01h
.../013:19/RDS> ReadError for disk 129 at 3 (0 0 4), C:8, T:01h
.../014:07/RDS> ReadError for disk 129 at 16061 (0 254 60), C:9, T:01h
.../014:55/RDS> ReadError for disk 129 at 16062 (0 254 61), C:10, T:01h
.../015:29/RDS> ReadError for disk 129 at 16063 (0 254 62), C:11, T:01h
.../015:59/RDS> ReadError for disk 129 at 16064 (0 254 63), C:12, T:01h
.../016:29/RDS> ReadError for disk 129 at 625137345 (38913 0 1), C:13, T:01h
.../016:59/RDS> ReadError for disk 129 at 625137346 (38913 0 2), C:14, T:01h
.../017:29/RDS> ReadError for disk 129 at 625137347 (38913 0 3), C:15, T:01h
.../017:59/RDS> ReadError for disk 129 at 625137348 (38913 0 4), C:16, T:01h
.../018:29/RDS> ReadError for disk 129 at 625142444 (38913 80 60), C:17, T:01h
.../019:00/RDS> ReadError for disk 129 at 625142445 (38913 80 61), C:18, T:01h
.../019:30/RDS> ReadError for disk 129 at 625142446 (38913 80 62), C:19, T:01h
.../020:00/RDS> ReadError for disk 129 at 625142447 (38913 80 63), C:20, T:01h
.../020:30/CSD> !- Disk 1 (129) can not be accessed
.../020:37/CSD> CheckDisk complete, ReadErrors 4
.../020:37/USD> No source / disk selected
.../020:37/USD> Select disk completed
.../020:41/MNU> - Main, Options
.../021:10/MNU> - Main, Quit
.../021:10/LOG> RunTime: 021:10
.../021:10/LOG> ### CLOSE LOG ###

[Tom]

It seems communication with the disk is/gets corrupted. This may be caused by damage to the disk, or by other factors such as bad cables or a bad power supply. Make sure the connections are good, and check the power supply. If other disks in the same machine work fine (and the log seems to indicate that is the case) it's probably a problem with the disk. Please create and post a SMART log:
http://www.diydatarecovery.nl/dp_manual/guide_smartcheck.htm
Another trick to try is to put the disk in another PC and see what happens then. Make sure not to boot from the disk, stick to using DiskPatch to access the disk.

[Sind]

Hi Tom,

Thanks for the info and your help. I am not completely new to this, I have been messing with computers for the past 25 years .  I did make sure that the cable works, also using another computer, so I am pretty satisfied that the computer or its hardware is not the issue, not even the problem disks home computer, it runs everything else there, 3 HD's just fine. I should probably mention that the disk in question is Win XP NTFS, 320 GB IDE WD Caviar, although I guess you gather most of that from the logs.

Here is the fresh SMART log, the problem disk is disk 1. Disk 0 is brand new, out of the box yesterday, and shows health of 94% humm....

Detected Controllers

  Disk Controller 1
    Device Vendor . . . . . . . . . . . . . : 8086
    Device ID . . . . . . . . . . . . . . . : 3A20
    Device  . . . . . . . . . . . . . . . . : Intel
    Device Location . . . . . . . . . . . . : Bus 0, Device 31, Function 2
    Device Ports  . . . . . . . . . . . . . : 0000-0007, F900-F90F, F800-F80F

  Disk Controller 2
    Device Vendor . . . . . . . . . . . . . : 8086
    Device ID . . . . . . . . . . . . . . . : 3A26
    Device  . . . . . . . . . . . . . . . . : Intel
    Device Location . . . . . . . . . . . . : Bus 0, Device 31, Function 5
    Device Ports  . . . . . . . . . . . . . : F600-F607, F500-F503, F400-F407, F300-F303, F200-F20F, F100-F10F

  Disk Controller 3
    Device Vendor . . . . . . . . . . . . . : 1B4B
    Device ID . . . . . . . . . . . . . . . : 91A3
    Device Location . . . . . . . . . . . . : Bus 1, Device 0, Function 0
    Device Ports  . . . . . . . . . . . . . : AF00-AF07, AE00-AE03, AD00-AD07, AC00-AC03, AB00-AB0F

  Disk Controller 4
    Device Vendor . . . . . . . . . . . . . : 197B
    Device ID . . . . . . . . . . . . . . . : 2363
    Device Location . . . . . . . . . . . . : Bus 5, Device 0, Function 0
    Device Ports  . . . . . . . . . . . . . : EF00-EF07, EE00-EE03, ED00-ED07, EC00-EC03, EB00-EB0F

  Disk Controller 5
    Device Vendor . . . . . . . . . . . . . : 197B
    Device ID . . . . . . . . . . . . . . . : 2363
    Device Location . . . . . . . . . . . . : Bus 6, Device 0, Function 0
    Device Ports  . . . . . . . . . . . . . : DF00-DF07, DE00-DE03, DD00-DD07, DC00-DC03, DB00-DB0F

Physical Disk Information - Disk: #0

  Hard Disk Summary
    Hard Disk Number  . . . . . . . . . . . : 0
    Interface . . . . . . . . . . . . . . . : S-ATA II
    Connection  . . . . . . . . . . . . . . : P
    Hard Disk Model ID  . . . . . . . . . . : ST31000333AS
    Hard Disk Revision  . . . . . . . . . . : CC1H
    Hard Disk Serial Number . . . . . . . . : 9TE1TR15
    Hard Disk Total Size  . . . . . . . . . : 953870 MB
    Current Temperature:  . . . . . . . . . : 24 øC (75 øF)
    Power on time . . . . . . . . . . . . . : 0 days, 5 hours
    Health: . . . . . . . . . . . . . . . . : 94 %
    Performance:  . . . . . . . . . . . . . : 100 %

  ATA Information
    Hard Disk Cylinders . . . . . . . . . . : 16383
    Hard Disk Heads . . . . . . . . . . . . : 16
    Hard Disk Sectors . . . . . . . . . . . : 63
    Total Sectors . . . . . . . . . . . . . : 1953525168
    ATA Revision  . . . . . . . . . . . . . : 7
    Bytes Per Sector  . . . . . . . . . . . : 512
    Buffer Size . . . . . . . . . . . . . . : 0 KB
    Multiple Sectors  . . . . . . . . . . . : 16
    Error Correction Bytes  . . . . . . . . : 4
    Unformatted Capacity  . . . . . . . . . : 953870 MB
    Maximum PIO Mode  . . . . . . . . . . . : 4
    Maximum Multiword DMA Mode  . . . . . . : 2
    Maximum UDMA Mode . . . . . . . . . . . : 150 MB/s (6)
    Active UDMA Mode  . . . . . . . . . . . : 150 MB/s (5)
    Minimum multiword DMA transfer time . . : 120 ns
    Recommended multiword DMA transfer time : 120 ns
    Minimum PIO transfer time without IORDY : 120 ns
    Minimum PIO transfer time with IORDY  . : 120 ns
    ATA Control Byte  . . . . . . . . . . . : Valid

  Acoustic Management Configuration
    Acoustic Management . . . . . . . . . . : Supported
    Acoustic Management . . . . . . . . . . : Enabled
    Current Acoustic Level  . . . . . . . . : Default (00h)
    Recommended Acoustic Level  . . . . . . : Max performance and volume (FEh)

  EIDE Properties
    Read Ahead Buffer . . . . . . . . . . . : Not Supported
    DMA . . . . . . . . . . . . . . . . . . : Supported
    Ultra DMA . . . . . . . . . . . . . . . : Supported
    S.M.A.R.T.  . . . . . . . . . . . . . . : Supported
    Power Management  . . . . . . . . . . . : Supported
    Write Cache . . . . . . . . . . . . . . : Supported
    Host Protected Area . . . . . . . . . . : Supported
    Advanced Power Management . . . . . . . : Not Supported
    Power Up In Standby . . . . . . . . . . : Not Supported
    48-bit LBA Addressing . . . . . . . . . : Supported
    Device Configuration Overlay  . . . . . : Supported
    IORDY Support . . . . . . . . . . . . . : Supported
    Read/Write DMA Queue  . . . . . . . . . : Not Supported
    NOP Command . . . . . . . . . . . . . . : Not Supported
    Trusted Computing . . . . . . . . . . . : Not Supported
    64-bit World Wide ID  . . . . . . . . . : Supported
    Streaming . . . . . . . . . . . . . . . : Not Supported
    Media Card Pass Through . . . . . . . . : Not Supported
    General Purpose Logging . . . . . . . . : Supported
    Error Logging . . . . . . . . . . . . . : Supported
    CFA Feature Set . . . . . . . . . . . . : Not Supported
    Long Physical Sectors (1) . . . . . . . : Not Supported
    Long Logical Sectors  . . . . . . . . . : Not Supported
    Write-Read-Verify . . . . . . . . . . . : Supported, Disabled
    NV Cache Feature  . . . . . . . . . . . : Not Supported
    NV Cache Power Mode . . . . . . . . . . : Not Supported

  S.M.A.R.T. Details
    Off-line data collection  . . . . . . . : Succesfully completed
    Self test execution status  . . . . . . : Succesfully completed
    Total time to complete off-line data ...: 617 seconds
    Execute off-line immediate  . . . . . . : Supported
    Abort/restart off-line by host  . . . . : Not Supported
    Off-line read scanning  . . . . . . . . : Supported
    Short Self-test . . . . . . . . . . . . : Supported
    Extended Self-test  . . . . . . . . . . : Supported
    Conveyance self-test  . . . . . . . . . : Supported
    Selective self-test . . . . . . . . . . : Supported
    Save data before/after power saving mode: Supported
    Enable/Disable attribute autosave . . . : Supported
    Error logging capability  . . . . . . . : Supported
    Short self-test estimated time  . . . . : 1 minutes
    Extended self-test estimated time . . . : 203 minutes
    Conveyance self-test estimated time . . : 2 minutes

  Security Mode
    Security Mode . . . . . . . . . . . . . : Supported
    Security Erase  . . . . . . . . . . . . : Supported
    Security Erase Time . . . . . . . . . . : 87 minutes
    Security Enhanced Erase Feature . . . . : Supported
    Security Enhanced Erase Time  . . . . . : 87 minutes
    Security Enabled  . . . . . . . . . . . : No
    Security Locked . . . . . . . . . . . . : No
    Security Frozen . . . . . . . . . . . . : No
    Security Counter Expired  . . . . . . . : No
    Security Level  . . . . . . . . . . . . : High

  Serial ATA Features
    S-ATA Compliance  . . . . . . . . . . . : Yes
    S-ATA I Signaling Speed (1.5 Gps) . . . : Supported
    S-ATA II Signaling Speed (3 Gps)  . . . : Supported
    Receipt Of Power Management Requests ...: Not Supported
    PHY Event Counters  . . . . . . . . . . : Supported
    Non-Zero Buffer Offsets In DMA Setup FIS: Not Supported
    DMA Setup Auto-Activate Optimization  . : Not Supported
    Device Initiating Interface Power Man...: Supported, Disabled
    In-Order Data Delivery  . . . . . . . . : Not Supported
    Asynchronous Notification . . . . . . . : Not Supported
    Software Settings Preservation  . . . . : Supported, Enabled
    Native Command Queuing  . . . . . . . . : Supported
    Queue Length  . . . . . . . . . . . . . : 32

  S.M.A.R.T.
    1  : Raw Read Error Rate            Threshold=6   Value=100 Worst=100 Data=0000000079BE Status=OK                        Flags=Error-rate, Performance, Statistical, Critical
    3  : Spin Up Time                   Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Statistical, Critical
    4  : Start/Stop Count               Threshold=20  Value=100 Worst=100 Data=000000000006 Status=OK                        Flags=Self Preserving, Event Count, Statistical
    5  : Reallocated Sectors Count      Threshold=36  Value=100 Worst=100 Data=000000000006 Status=OK                        Flags=Self Preserving, Event Count, Statistical, Critical
    7  : Seek Error Rate                Threshold=30  Value=100 Worst=253 Data=0000000061C8 Status=OK                        Flags=Error-rate, Performance, Statistical, Critical
    9  : Power-On Time Count            Threshold=0   Value=100 Worst=100 Data=000000000005 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    10 : Spin Retry Count               Threshold=97  Value=100 Worst=100 Data=000000000000 Status=OK                        Flags=Event Count, Statistical, Critical
    12 : Drive Power Cycle Count        Threshold=20  Value=100 Worst=100 Data=000000000006 Status=OK                        Flags=Self Preserving, Event Count, Statistical
    184: Vendor-specific                Threshold=99  Value=100 Worst=100 Data=000000000000 Status=OK                        Flags=Self Preserving, Event Count, Statistical
    187: Vendor-specific                Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    188: Vendor-specific                Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Statistical
    189: Vendor-specific                Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Error-rate, Statistical
    190: Airflow Temperature            Threshold=45  Value=76  Worst=64  Data=000018170018 Status=OK                        Flags=Self Preserving, Statistical
    194: HDD Temperature                Threshold=0   Value=24  Worst=40  Data=001600000018 Status=OK (Always passing)       Flags=Self Preserving, Statistical
    195: Hardware ECC Recovered         Threshold=0   Value=100 Worst=100 Data=0000000079BE Status=OK (Always passing)       Flags=Event Count, Error-rate, Statistical
    197: Current Pending Sector Count   Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Event Count, Statistical
    198: Off-Line Uncorrectable Sect... Threshold=0   Value=100 Worst=100 Data=000000000000 Status=OK (Always passing)       Flags=Event Count
    199: Ultra ATA CRC Error Count      Threshold=0   Value=200 Worst=253 Data=000000000000 Status=OK (Always passing)       Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical
    240: Head Flying Hours              Threshold=0   Value=100 Worst=253 Data=A8A100000005 Status=OK (Always passing)       Flags=
    241: Vendor-specific                Threshold=0   Value=100 Worst=253 Data=00000000000A Status=OK (Always passing)       Flags=
    242: Vendor-specific                Threshold=0   Value=100 Worst=253 Data=00000000004A Status=OK (Always passing)       Flags=

Physical Disk Information - Disk: #1

  Hard Disk Summary
    Hard Disk Number  . . . . . . . . . . . : 1
    Interface . . . . . . . . . . . . . . . : IDE/ATA
    Connection  . . . . . . . . . . . . . . : 4M
    Hard Disk Model ID  . . . . . . . . . . : WDC WD3200JB-00KFA0
    Hard Disk Revision  . . . . . . . . . . : 08.05J08
    Hard Disk Serial Number . . . . . . . . : WD-WCAMR4234637
    Hard Disk Total Size  . . . . . . . . . : 305245 MB
    Current Temperature:  . . . . . . . . . : ?
    Power on time . . . . . . . . . . . . . : ?
    Health: . . . . . . . . . . . . . . . . : 100 %
    Performance:  . . . . . . . . . . . . . : 100 %

  ATA Information
    Hard Disk Cylinders . . . . . . . . . . : 30357
    Hard Disk Heads . . . . . . . . . . . . : 16
    Hard Disk Sectors . . . . . . . . . . . : 63
    Total Sectors . . . . . . . . . . . . . : 625142448
    ATA Revision  . . . . . . . . . . . . . : 6
    Bytes Per Sector  . . . . . . . . . . . : 512
    Buffer Size . . . . . . . . . . . . . . : 8192 KB
    Multiple Sectors  . . . . . . . . . . . : 16
    Error Correction Bytes  . . . . . . . . : 65
    Unformatted Capacity  . . . . . . . . . : 305245 MB
    Maximum PIO Mode  . . . . . . . . . . . : 4
    Maximum Multiword DMA Mode  . . . . . . : 2
    Maximum UDMA Mode . . . . . . . . . . . : 100 MB/s (5)
    Active UDMA Mode  . . . . . . . . . . . : 100 MB/s (5)
    Minimum multiword DMA transfer time . . : 120 ns
    Recommended multiword DMA transfer time : 120 ns
    Minimum PIO transfer time without IORDY : 120 ns
    Minimum PIO transfer time with IORDY  . : 120 ns
    ATA Control Byte  . . . . . . . . . . . : Valid

  Acoustic Management Configuration
    Acoustic Management . . . . . . . . . . : Supported
    Acoustic Management . . . . . . . . . . : Disabled
    Current Acoustic Level  . . . . . . . . : Max performance and volume (FEh)
    Recommended Acoustic Level  . . . . . . : Min performance and volume (80h)

  EIDE Properties
    Read Ahead Buffer . . . . . . . . . . . : Not Supported
    DMA . . . . . . . . . . . . . . . . . . : Supported
    Ultra DMA . . . . . . . . . . . . . . . : Supported
    S.M.A.R.T.  . . . . . . . . . . . . . . : Supported
    Power Management  . . . . . . . . . . . : Supported
    Write Cache . . . . . . . . . . . . . . : Supported
    Host Protected Area . . . . . . . . . . : Supported
    Advanced Power Management . . . . . . . : Not Supported
    Power Up In Standby . . . . . . . . . . : Not Supported
    48-bit LBA Addressing . . . . . . . . . : Supported
    Device Configuration Overlay  . . . . . : Supported
    IORDY Support . . . . . . . . . . . . . : Supported
    Read/Write DMA Queue  . . . . . . . . . : Not Supported
    NOP Command . . . . . . . . . . . . . . : Not Supported
    Trusted Computing . . . . . . . . . . . : Not Supported
    64-bit World Wide ID  . . . . . . . . . : Not Supported
    Streaming . . . . . . . . . . . . . . . : Not Supported
    Media Card Pass Through . . . . . . . . : Not Supported
    General Purpose Logging . . . . . . . . : Not Supported
    Error Logging . . . . . . . . . . . . . : Supported
    CFA Feature Set . . . . . . . . . . . . : Not Supported
    Long Physical Sectors (1) . . . . . . . : Not Supported
    Long Logical Sectors  . . . . . . . . . : Not Supported
    Write-Read-Verify . . . . . . . . . . . : Not Supported
    NV Cache Feature  . . . . . . . . . . . : Not Supported
    NV Cache Power Mode . . . . . . . . . . : Not Supported

  S.M.A.R.T. Details
    Off-line data collection  . . . . . . . : Unknown
    Self test execution status  . . . . . . : Succesfully completed
    Total time to complete off-line data ...: 9600 seconds
    Execute off-line immediate  . . . . . . : Supported
    Abort/restart off-line by host  . . . . : Supported
    Off-line read scanning  . . . . . . . . : Supported
    Short Self-test . . . . . . . . . . . . : Supported
    Extended Self-test  . . . . . . . . . . : Supported
    Conveyance self-test  . . . . . . . . . : Supported
    Selective self-test . . . . . . . . . . : Supported
    Save data before/after power saving mode: Supported
    Enable/Disable attribute autosave . . . : Supported
    Error logging capability  . . . . . . . : Supported
    Short self-test estimated time  . . . . : 2 minutes
    Extended self-test estimated time . . . : 116 minutes
    Conveyance self-test estimated time . . : 6 minutes

  Security Mode
    Security Mode . . . . . . . . . . . . . : Supported
    Security Erase  . . . . . . . . . . . . : Not Supported
    Security Erase Time . . . . . . . . . . : Not Supported
    Security Enhanced Erase Feature . . . . : Not Supported
    Security Enhanced Erase Time  . . . . . : Not Supported
    Security Enabled  . . . . . . . . . . . : No
    Security Locked . . . . . . . . . . . . : No
    Security Frozen . . . . . . . . . . . . : No
    Security Counter Expired  . . . . . . . : No
    Security Level  . . . . . . . . . . . . : High

  Serial ATA Features
    S-ATA Compliance  . . . . . . . . . . . : No
    S-ATA I Signaling Speed (1.5 Gps) . . . : Not Supported
    S-ATA II Signaling Speed (3 Gps)  . . . : Not Supported
    Receipt Of Power Management Requests ...: Not Supported
    PHY Event Counters  . . . . . . . . . . : Not Supported
    Non-Zero Buffer Offsets In DMA Setup FIS: Not Supported
    DMA Setup Auto-Activate Optimization  . : Not Supported
    Device Initiating Interface Power Man...: Not Supported
    In-Order Data Delivery  . . . . . . . . : Not Supported
    Asynchronous Notification . . . . . . . : Not Supported
    Software Settings Preservation  . . . . : Not Supported
    Native Command Queuing  . . . . . . . . : Not Supported
    Queue Length  . . . . . . . . . . . . . : Not Supported

  S.M.A.R.T.
    255: Vendor-specific                Threshold=255 Value=199 Worst=199 Data=FFFFFFFFFFF2 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=253 Worst=253 Data=FFFF00000787 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=1   Worst=1   Data=FFFFFFFFFFFF Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=200 Worst=200 Data=FFFF00000000 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=100 Worst=253 Data=FFFF00000000 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=100 Worst=1   Data=FFFF00000000 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=100 Worst=100 Data=FFFFFFFFBFFA Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    254: Vendor-specific                Threshold=255 Value=99  Worst=99  Data=FFFFFFFFFBFB Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=1   Worst=1   Data=FFFFFFFFFFFF Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=134 Worst=133 Data=FFFF00000010 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=1   Worst=1   Data=FFFF0000FFFF Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical
    255: Vendor-specific                Threshold=255 Value=200 Worst=200 Data=FFFF00000000 Status=Fail (Always failing)     Flags=Self Preserving, Event Count, Error-rate, Performance, Statistical, Critical

[Tom]

Disk 0 shows the onset of decay. If that disk just came out of the box I'd return it. The problems aren't big, but this simply shouldn't happen to a new disk, in my opinion.

Disk 1 seems to be out of reach; DiskPatch (and the PC) can not communicate with the disk. Some disk details can be read, SMART stats can't. I recall that things like this can sometimes be fixed by flashing the drive's firmware, but don't pin me down on that. You'd best google around a little for info on that, or wait for comments by Joep (there's two of us); he knows more about this type of thing. Might take a bit of time though, it's midnight here now and the weekend has begun.

[Sind]

Thanks Tom, I will check back tomorrow.