Welcome, Guest. Please login or register.
Did you miss your activation email?
June 20, 2019, 03:36:47 PM
Home Help Search Login Register
News: For support on DIY DataRecovery.nl products visit www.disktuna.com

+  DIY DataRecovery.nl Support forum
|-+  Support
| |-+  DiskPatch (Moderators: Tom, Joep)
| | |-+  Cloning problem
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Cloning problem  (Read 9526 times)
dhanate
member

Posts: 5


« on: August 10, 2008, 12:15:22 PM »

Hi,
Can anybody tell me what happen? I try to clone my 160GB h/d to an USB external 250 GB H/D, D/P show 155xx:xx time remaining after 1 hour pass. Even the block skipped and write errors are zero. What happen to my H/D?

Regards,

Daniel
Logged
Tom
Developer and Support Tech
Administrator
member
*****
Posts: 1476


WWW
« Reply #1 on: August 11, 2008, 08:36:39 AM »

What happened to which hard disk? I don't really understand the question.
Cloning to/from USB is VERY slow and should be avoided if possible. The best thing would be to connect all disks that are involved directly to the PC's controller. You could probably remove the disk from the USB casing and connect it directly, that would be best.
If that is not an option, check to see if the disks are read/written. Check the access lights and the disk sounds. It's possible that DiskPatch IS cloning but very slowly.
Also, why are you cloning? How bad is the disk? If you like you can post a SMART check log, we can then see what the status of the disk is.
Check here for details : http://www.diydatarecovery.nl/dp_manual/guide_smartcheck.htm
Logged

dhanate
member

Posts: 5


« Reply #2 on: August 11, 2008, 04:54:53 PM »

Here below are the code from D/P
Code:
.../000:07/LOG> ### LOG START ###
.../000:07/LOG> DISKPATCH 3.4.100
.../000:07/LOG> (C) 2000-2008 DIY DataRecovery
.../000:07/LOG> Contact info: HTTP://www.DIYDataRecovery.nl
.../000:07/LOG> MemFree: 76Kb
.../000:07/LOG> CommandLineParms:
.../000:07/LOG> LogDate: 08-11-2008
.../000:07/CFG> FilePath="1/C:\DPFILES\"
.../000:07/CFG> LogFilename="DP.LOG"
.../000:07/CFG> ReadRetries="32"
.../000:07/CFG> WriteRetries="32"
.../000:07/CFG> MaxReadErrors="32"
.../000:07/CFG> MaxWriteErrors="1"
.../000:07/CFG> ReadDelay="0"
.../000:07/CFG> VfyFixedBadSect="1"
.../000:07/CFG> CleanAfterDOD="1"
.../000:07/CFG> DiskReset="1"
.../000:07/CFG> SectorSkip="1024"
.../000:07/CFG> AutoSaveState="1"
.../000:07/CFG> DumpFoundSectors="0"
.../000:07/CFG> FixFats="1"
.../000:07/CFG> MaxFatScan="51200"
.../000:07/CFG> MaxDataColEntries="256"
.../000:07/CFG> IgnoreF8FF="0"
.../000:07/CFG> DownSizeExt="1"
.../000:07/CFG> ScanSignature="55AA"
.../000:07/CFG> Rebuild="00"
.../000:07/13H> Ext13H installed test requested
.../000:07/13H> Disk found at 128
.../000:07/13H> Ext13H version: EDD-3.0
.../000:07/13H> Ext13H Support: Extended disk access functions
.../000:07/13H> Ext13H Support: Enhanced disk drive functions
.../000:07/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:07/13H> Drive Interface Info :
.../000:07/13H> Disk 128 X13H data : 16383/16/63 312581808/512
.../000:07/13H> Disk found at 129
.../000:07/13H> Ext13H version: EDD-3.0
.../000:07/13H> Ext13H Support: Extended disk access functions
.../000:07/13H> Ext13H Support: Removable drive controller functions
.../000:07/13H> Ext13H Support: Enhanced disk drive functions
.../000:07/13H> Ext13H Flags: DMA boundary errors handled transparently
.../000:07/13H> Drive Interface Info :
.../000:07/13H> Disk 129 X13H data : 0/0/0 488397168/512
.../000:07/13H> Ext13H tested ok
.../000:07/FDL> DiskList requested
.../000:07/FDL> Disk found at 128
.../000:07/FDL> Disk found at 129
### DISKLIST.ARRAY ###
__D_|________LBA_|___H_|__S_|__GB
128 | .312581808 | 255 | 63 | 149
129 | .488397168 | .80 | 63 | 232
..0 | .........0 | ..0 | .0 | ..0
..0 | .........0 | ..0 | .0 | ..0
.../000:08/IAS> AdmiSector found on disk 0 (128)
.../000:08/IAS> AdmiSector found on disk 1 (129)
.../000:08/EXE> Read/Write pattern test for disk 0 (128) successful
.../000:09/EXE> Read/Write pattern test for disk 1 (129) successful
.../000:09/WAS> AdmiSectors in use : 0+ 1+
.../000:09/KEY> 22O7O8O137/4
.../000:09/PFC> UDMA driver not loaded
.../000:09/PFC> PQstuff signature not detected on disk 0 (128)
.../000:09/PFC> PQstuff signature not detected on disk 1 (129)
.../000:10/PFC> Partition State backup not found on disk 0 (128)
.../000:10/PFC> Partition State backup not found on disk 1 (129)
.../000:10/PFC> Last Repair (R) for disk 0 (128) performed on 08112008/112226
.../000:10/PFC> Last Repair (R) for disk 1 (129) performed on 08112008/112226
.../000:17/MNU> - Main, Select Disk
.../000:34/LST> LoadState requested for disk 0 (128)
.../000:51/LST> LoadState completed for disk 0 (128)
.../000:51/LOG> DataCollection items found: 8 / 8
### DATACOLLECTION.ARRAY, FULL ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL_|_F
001 | 128 | ......2048 | ...NTFS | ..BS | ......2048 | ..13670400 | PRI | I
002 | 128 | ..13672447 | ...NTFS | .BBS | ......2048 | ..13670400 | PRI | I
003 | 128 | .........0 | ...NTFS | PTE1 | ......2048 | ..13670400 | PRI | I
004 | 128 | .........0 | ...NTFS | PTE2 | .164663296 | .147914752 | PRI | I
005 | 128 | ......2048 | ...NTFS | ..BS | ......2048 | ..13670400 | PRI | I
006 | 128 | ..13672447 | ...NTFS | .BBS | ......2048 | ..13670400 | PRI | I
007 | 128 | .164663296 | ...NTFS | ..BS | .164663296 | .147914752 | PRI | I
008 | 128 | .312578047 | ...NTFS | .BBS | .164663296 | .147914752 | PRI | I
.../000:51/LOG> DataCollection items found: 8 / 8
### DATACOLLECTION.ARRAY, CLEANED ###
SEQ_|___D_|________LOC_|____TYPE_|__COM_|______START_|_____LENGTH_|__PL
.../000:51/LOG> PartList items created: 2
### PARTLIST.ARRAY ###
SEQ_|____TYPE_|_PTE_|__BS_|_BBS_|F8FF_|___S_|___L_|__PL_|_C_|___R
001 | ...NTFS | ..3 | ..1 | ..2 | --- | ..3 | ..3 | ..3 | 3 | ..A
002 | ...NTFS | ..4 | ..7 | ..8 | --- | ..4 | ..4 | ..4 | 3 | ..A
### PARTLIST.ARRAY.INTERPRETED ###
SEQ_|____TYPE_|______START_|_____LENGTH_|________END_|__PL_|___R
001 | ...NTFS | ......2048 | ..13670400 | ..13672447 | PRI | ..A
002 | ...NTFS | .164663296 | .147914752 | .312578047 | PRI | ..A
.../000:51/CSD> Start CheckDisk for disk 0 (128)
.../000:51/CSD> CheckDisk complete, ReadErrors 0
.../000:51/USD> Disk 4 (132) selected
132/000:51/USD> MBR for disk 0 (128)
132/000:51/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3ภŽะผ.|๛P.P.พ.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ฟ..PWนๅ.๓คหฝพ.ฑ.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.ƒล.โ๔อ.‹๕
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ƒฦ.It.8,t๖ ต.ด.‹
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ๐ฌ<.tป..ด.อ.๋๒ˆ
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.่F.s*F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ถ.uา?F..ƒ
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..ƒV..่!.s. ถ.๋
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ผ?>}Uชt.?~..tศ 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ท.๋ฉ‹.W‹๕หฟ..ŠV
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .ด.อ.r#Šม$?˜ŠŠ
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C๗ใ‹ั†ึฑ.า๎B๗โ9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.ธ..ป.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ‹N.‹V.อ.sQOtN2ไŠ
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.อ.๋ไŠV.`ปชUดAอ
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6?๛Uชu0๖ม.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.ดB‹๔อ.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2ไŠV.อ.๋ึa๙รInva
304   6C 69 64 20 50 61 72 74 69 74 69 6F 6E 20 74 61  |  lid Partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 43 D6 46 BF 00 00 00 20  |  .....,DcCึFฟ...
448   21 00 07 11 FE 53 00 08 00 00 00 98 D0 00 80 D0  |  !...S.....˜ะ.?ะ
464   C8 FF 07 15 D4 FF 00 90 D0 09 00 00 D1 08 00 00  |  ศ...ิ..?ะ...ั...
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............Uช
###
132/000:51/VEC> Start Verify EPBR Chain for disk 0 (128)
132/000:51/VEC> Listing current partitions on disk:
132/000:51/VEC>     NTFS (P)     Recovery        2048    13670400       (7 Gb)
132/000:51/VEC>     NTFS (P)         Data   164663296   147914752      (71 Gb)
132/000:51/VEC> Partition Table info for sector 0 (0 0 1)
132/000:51/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0..32..33 | ..851..17..62 | ......2048 | ..13670400
..2 .128 | ..07 | .1023.208...8 | .1023..21..20 | .164663296 | .147914752
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
132/000:51/VEC> 55AA sig Ok
132/000:51/LOG> Boot sector dump requested at 2048 (0 32 33)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 2048
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 13670399
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 854399
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 9ADC2ABBDC2A9215
........Volume Label (txt): Recovery
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
132/000:51/VEC> BS and BBS equal
132/000:51/LOG> Boot sector dump requested at 164663296 (10249 208 8)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 164663296
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 147914751
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 9244671
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 8A447A40447A2ED7
........Volume Label (txt): Data
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
132/000:51/VEC> BS and BBS equal
132/000:51/VEC> Verify EPBR Chain completed
132/000:52/USD> Select disk completed
132/000:54/MNU> - Main, Repairs
132/000:56/MNU> - Repair, Rebuild Partition Tables
132/001:17/MRL> User abort MakeRSQPartList
132/001:17/EXE> Repair discontinued
132/001:25/MNU> - Main, Repairs
132/001:29/MNU> - Main, Disk Ops
132/001:32/MNU> - Main, Utilities
132/001:40/MNU> - Main, Select Disk
132/001:44/CSD> Start CheckDisk for disk 0 (128)
132/001:44/CSD> CheckDisk complete, ReadErrors 0
132/001:44/USD> Disk 0 (128) selected
132/001:44/GSC> No geo change detected for disk 0 (128)
132/001:44/WAS> AdmiSectors in use : 0+ 1+
132/001:44/GSC> Geo for disk 0 (128) saved as 0312581808255063
128/001:44/USD> MBR for disk 0 (128)
128/001:44/LOG> SectorDump requested at 0 (0 0 1)
###
000   33 C0 8E D0 BC 00 7C FB 50 07 50 1F FC BE 1B 7C  |  3ภŽะผ.|๛P.P.พ.|
016   BF 1B 06 50 57 B9 E5 01 F3 A4 CB BD BE 07 B1 04  |  ฟ..PWนๅ.๓คหฝพ.ฑ.
032   38 6E 00 7C 09 75 13 83 C5 10 E2 F4 CD 18 8B F5  |  8n.|.u.ƒล.โ๔อ.‹๕
048   83 C6 10 49 74 19 38 2C 74 F6 A0 B5 07 B4 07 8B  |  ƒฦ.It.8,t๖ ต.ด.‹
064   F0 AC 3C 00 74 FC BB 07 00 B4 0E CD 10 EB F2 88  |  ๐ฌ<.tป..ด.อ.๋๒ˆ
080   4E 10 E8 46 00 73 2A FE 46 10 80 7E 04 0B 74 0B  |  N.่F.s*F.?~..t.
096   80 7E 04 0C 74 05 A0 B6 07 75 D2 80 46 02 06 83  |  ?~..t. ถ.uา?F..ƒ
112   46 08 06 83 56 0A 00 E8 21 00 73 05 A0 B6 07 EB  |  F..ƒV..่!.s. ถ.๋
128   BC 81 3E FE 7D 55 AA 74 0B 80 7E 10 00 74 C8 A0  |  ผ?>}Uชt.?~..tศ 
144   B7 07 EB A9 8B FC 1E 57 8B F5 CB BF 05 00 8A 56  |  ท.๋ฉ‹.W‹๕หฟ..ŠV
160   00 B4 08 CD 13 72 23 8A C1 24 3F 98 8A DE 8A FC  |  .ด.อ.r#Šม$?˜ŠŠ
176   43 F7 E3 8B D1 86 D6 B1 06 D2 EE 42 F7 E2 39 56  |  C๗ใ‹ั†ึฑ.า๎B๗โ9V
192   0A 77 23 72 05 39 46 08 73 1C B8 01 02 BB 00 7C  |  .w#r.9F.s.ธ..ป.|
208   8B 4E 02 8B 56 00 CD 13 73 51 4F 74 4E 32 E4 8A  |  ‹N.‹V.อ.sQOtN2ไŠ
224   56 00 CD 13 EB E4 8A 56 00 60 BB AA 55 B4 41 CD  |  V.อ.๋ไŠV.`ปชUดAอ
240   13 72 36 81 FB 55 AA 75 30 F6 C1 01 74 2B 61 60  |  .r6?๛Uชu0๖ม.t+a`
256   6A 00 6A 00 FF 76 0A FF 76 08 6A 00 68 00 7C 6A  |  j.j..v..v.j.h.|j
272   01 6A 10 B4 42 8B F4 CD 13 61 61 73 0E 4F 74 0B  |  .j.ดB‹๔อ.aas.Ot.
288   32 E4 8A 56 00 CD 13 EB D6 61 F9 C3 49 6E 76 61  |  2ไŠV.อ.๋ึa๙รInva
304   6C 69 64 20 50 61 72 74 69 74 69 6F 6E 20 74 61  |  lid Partition ta
320   62 6C 65 00 45 72 72 6F 72 20 6C 6F 61 64 69 6E  |  ble.Error loadin
336   67 20 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74  |  g operating syst
352   65 6D 00 4D 69 73 73 69 6E 67 20 6F 70 65 72 61  |  em.Missing opera
368   74 69 6E 67 20 73 79 73 74 65 6D 00 00 00 00 00  |  ting system.....
384   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
400   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
416   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
432   00 00 00 00 00 2C 44 63 43 D6 46 BF 00 00 00 20  |  .....,DcCึFฟ...
448   21 00 07 11 FE 53 00 08 00 00 00 98 D0 00 80 D0  |  !...S.....˜ะ.?ะ
464   C8 FF 07 15 D4 FF 00 90 D0 09 00 00 D1 08 00 00  |  ศ...ิ..?ะ...ั...
480   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |  ................
496   00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA  |  ..............Uช
###
128/001:44/VEC> Start Verify EPBR Chain for disk 0 (128)
128/001:44/VEC> Listing current partitions on disk:
128/001:44/VEC>     NTFS (P)     Recovery        2048    13670400       (7 Gb)
128/001:44/VEC>     NTFS (P)         Data   164663296   147914752      (71 Gb)
128/001:44/VEC> Partition Table info for sector 0 (0 0 1)
128/001:44/LOG> PartListDump requested at 0 (0 0 1)
### _ACT_|_TYPE_|__START--C/H/S_|__END----C/H/S_|__LBA-start_|_LBA-length
..1 ...0 | ..07 | ....0..32..33 | ..851..17..62 | ......2048 | ..13670400
..2 .128 | ..07 | .1023.208...8 | .1023..21..20 | .164663296 | .147914752
..3 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
..4 ...0 | ..00 | ....0...0...0 | ....0...0...0 | .........0 | .........0
128/001:44/VEC> 55AA sig Ok
128/001:44/LOG> Boot sector dump requested at 2048 (0 32 33)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 2048
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 13670399
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 854399
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 9ADC2ABBDC2A9215
........Volume Label (txt): Recovery
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/001:44/VEC> BS and BBS equal
128/001:44/LOG> Boot sector dump requested at 164663296 (10249 208 8)
### BootSectorDump for BStype NTFS
...........Jump Code (hex): EB5290
............OEM Name (txt): NTFS
....Bytes per Sector (dec): 512
.Sectors per Cluster (dec): 8
....Reserved Sectors (dec): 0
..............Unused (hex): 0000000000
....Media Descriptor (hex): F8
..............Unused (hex): 0000
...Sectors per Track (dec): 63
.....Heads per Track (dec): 255
......Hidden Sectors (dec): 164663296
..............Unused (hex): 00000000
.............Unknown (hex): 00800080
.......Total Sectors (dec): 147914751
........MFT Location (dec): 786432
.MFT Mirror Location (dec): 9244671
....Clusters per FRS (dec): 246
.Clusters/Indx Block (dec): 1
...........Volume ID (hex): 8A447A40447A2ED7
........Volume Label (txt): Data
............Checksum (hex): 00000000
....Sector Signature (hex): AA55
128/001:44/VEC> BS and BBS equal
128/001:44/VEC> Verify EPBR Chain completed
128/001:44/USD> Select disk completed
128/001:47/MNU> - Main, Repairs
128/001:48/MNU> - Repair, Rebuild Partition Tables
128/002:10/EXE> Analysis aborted
128/002:12/MNU> - Main, Quit
128/002:12/LOG> RunTime: 002:12
128/002:12/LOG> ### CLOSE LOG ###
Logged
dhanate
member

Posts: 5


« Reply #3 on: August 11, 2008, 05:10:50 PM »

Hi,
I can not create smart log because I boot my Labtop from CD , the option ?Create disk helth report?? didn?t show on screen. When I try to boot from USB device D/P show Free Memory  problem and can not continue? Please advice.

Dhanate
Logged
Joep
Developer and Support Tech
Administrator
member
*****
Posts: 1476



WWW
« Reply #4 on: August 12, 2008, 09:05:11 AM »

Hello,

You didn't answer the most obvious question: why are you trying to clone the disk, Please describe the problems you have with the disk you are trying to clone. You ask "What heppened to my H/D" ... I haven't got the foggiest idea because you never told us.

You boot from a USB disk and DiskPatch is on there? How did you create that disk please?
Logged

--
Kind regards,
Joep - My blog @: www.disktuna.com - Try my JPEG Repair Tool: https://youtu.be/Ox2F8QRuU5Q
dhanate
member

Posts: 5


« Reply #5 on: August 12, 2008, 12:26:32 PM »

Hi,
My labtop show "SMART can not predicted on hard disk ...." and when I press F1 to continue it show "No operating system" then I try to clone my hardisk. My labtop don't have diskette so I can not make a SMART report to you as I mention in my previous rep.

Regards,

Dhanate
Logged
Tom
Developer and Support Tech
Administrator
member
*****
Posts: 1476


WWW
« Reply #6 on: August 12, 2008, 01:01:22 PM »

The log shows no real problems. So as far as DiskPatch is concerned the disk is okay, which doesn't mean that no problems exist. Interestingly enough, no read errors show up (even though you didn't post the correct log *), so the disk seems okay from a mechanical point of view. Have you tried accessing the disks by starting from an alternative O.S, like knoppix (www.knoppix.org) or windows PE from a cd? Read more here: www.nu2.nu/pebuilder. Try that and report back, please. If you HAVE already tried accessing the disk please let us know how that turned out.

You should try running that SMART check anyway. You might not be able to save the log but the tool also displays on-screen what the health of the disk is (look here for an example:

The blue bar that is displayed contains a number, please check that and report back).

(*) - we need this log: http://www.diydatarecovery.nl/dp_manual/guide_supportanalysis.htm
Logged

dhanate
member

Posts: 5


« Reply #7 on: August 21, 2008, 02:10:48 AM »

Hi,
I try to accesss the disk from BART PE , it show no error but nothing inside the disk. Is there any reason why I can not see the SMART check from the menu?

Dhanate
Logged
Tom
Developer and Support Tech
Administrator
member
*****
Posts: 1476


WWW
« Reply #8 on: August 21, 2008, 08:59:34 AM »

Well, the only one i can think of is that you're doing it wrong, it's really in there. But nevermind that, that doesn't seem to be the problem.
You say you can access the disk but the disk seems empty. In that case the damage is inside the partition(s) so that leaves only one option: iRecover. You'll have to run iRecover from the windows PE cd and copy files to a USB connected disk (or key/stick). Download the iRecover PE setup files and follow the directions.
http://www.diydatarecovery.nl/irecoverpe.htm
Logged

Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!